The condition of a power transformer can be predicted based on the contents of the transformer oil. One of the most common parameters that are observed in the transformer oil is 2-Furaldehyde, a compound that is produced due to the aging of Kraft paper. Although the optical characterization of 2-Furaldehyde has been widely reported, the fundamental theories of the observation of the optical absorbance peaks have not been elaborated. This study investigates the optical characteristics of 2-Furaldehyde in the near infrared region. Ten samples with different concentrations of 2-Furaldehyde were prepared and verified using the conventional method. The samples were then characterized using optical spectroscopy method with 50 mm path length cuvettes. Three peaks were observed at 1610 nm-1640 nm, 1100 nm-1115 nm and 860 nm-890 nm wavebands and were correlated to the overtones of the aromatic C-H stretch in 2-Furaldehyde. The appearance of these overtones corresponding to the Morse Oscillation Theory was discussed. This fundamental knowledge is significant in developing a portable optical device that enables the detection of 2-Furaldehyde on site.
For most natural or naturally-derived liquid products, their color reflects on their quality and occasionally affects customer preferences. To date, there are a few subjective and objective methods for color measurement which are currently utilized by various industries. Researchers are also improving these methods and inventing new methods, as color is proven to have the ability to provide various information on the condition and quality of the liquid. However, a review on the methods, especially for amber-colored liquid, has not been conducted yet. This paper presents a comprehensive review on the subjective and objective methods for color measurement of amber-colored liquids. The pros and cons of the measurement methods, the effects of the color on customer preferences, and the international industry standards on color measurements are reviewed and discussed. In addition, this study elaborates on the issues and challenges related to the color measurement techniques as well as recommendations for future research. This review demonstrates that the existing color measurement technique can determine the color according to the standards and color scales. However, the efforts toward minimizing the complexity of the hardware while maximizing the signal processing through advanced computation are still lacking. Therefore, through this critical review, this review can hopefully intensify the efforts toward finding an optimized method or technique for color measurement of liquids and thus expedite the development of a portable device that can measure color accurately.
Water can be an irritant to a power transformer, as it is recognized as a major hazard to the operation of transformers. The water content of a transformer insulation system comprises the water in the transformer insulation oil and in the cellulose paper. The increase in the water content in the insulation system leads to reduced breakdown voltage, accelerated aging of the oil–paper insulation system, and the possibility of producing bubbles at high temperatures. Therefore, various techniques have been applied to measure the water content in both oil and paper insulation. This article comprehensively reviews and analyzes the methods (technically or nontechnically) that have been used to monitor the water content in transformer insulation systems. Apart from discussing the advantages and major drawbacks of these methods, the accuracy, measurement time, and cost of each technique are also elucidated in this review. This review can be extremely useful to the utility in monitoring and maintaining the good condition of transformers. Based on the reviewed methods and their challenges, a few future research directions and prospects for determining the water content in transformer insulation systems are outlined, such as utilizing artificial intelligence and enhancing current techniques.
Periodic preventive maintenance of power transformer should be conducted for its health monitoring and early fault detection. Transformer oil is a vital element where its contents and properties need to be monitored during the service life of a power transformer. This paper presents an optical spectroscopy measurement from 200 nm to 3300 nm to characterize the transformer oil, which were sampled from the main tanks and 'on-load tap changer' of power transformers. The correlation of the optical characteristics in the range of 2120 nm to 2220 nm to the Dissolved Gas Analysis results and Duval Triangle interpretation demonstrates that the low energy electrical discharges, high energy electrical discharges as well as the thermal faults rated at temperatures above 700 • C in power transformers can be accurately predicted. For faster and accurate analysis of fault prediction, a data mining analytics tool was constructed using Rapid Miner server to analyze and verify the predictions for a total of 108 oil samples. For the optimization, continuous iterations were performed to determine the best absorbance-wavelength combination that can improve the accuracy of the prediction. The performance of the optical spectroscopy technique integrated with data analytic tool was analyzed and it was found that the technique contributes to a high accuracy of 98.1% in fault prediction. It is a cost-effective and quicker complementing approach to carry out pre-screening of the transformer oil in order to know the condition of the power transformers based on the transformer oil's optical characteristics.INDEX TERMS Data mining, fault prediction, optical spectroscopy, power transformers, transformer oil.
Microalgae have become a popular area of research over the past few decades due to their enormous benefits to various sectors, such as pharmaceuticals, biofuels, and food and feed. Nevertheless, the benefits of microalgae cannot be fully exploited without the optimization of their upstream production. The growth of microalgae is commonly measured based on the optical density of the sample. However, the presence of debris in the culture and the optical absorption of the intercellular components affect the accuracy of this measurement. As a solution, this paper introduces the direct optical detection of glucose molecules at 940–960 nm to accurately measure the growth of microalgae. In addition, this paper also discusses the effects of the presence of glucose on the absorption of free water molecules in the culture. The potential of the optical detection of glucose as a complement to the commonly used optical density measurement at 680 nm is discussed in this paper. Lastly, a few recommendations for future works are presented to further verify the credibility of glucose detection for the accurate determination of microalgae’s growth.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.