Droplet epitaxy is a versatile method for fabricating nanostructures, but the standard process relies on spatially random droplet formation resulting in poor control of the position of the final nanostructure. The authors demonstrate site-controlled droplet formation utilizing local Ga deposition combined with self-assembled droplet formation. The local Ga deposition is realized by employing a shadow mask with small apertures. Our experiments show that out-diffusion of Ga from the aperture area is important and can be minimized by creating a Ga saturated surface before depositing through the mask. The effects of Ga precoverage, Ga amount for droplet formation, and droplet formation temperature on size, height, and density of droplets have been investigated. With optimized parameters, the authors were able to generate a single droplet per aperture with over 90% probability.
We present the fabrication of strain-free quantum dots in the In0.53Ga0.47As/In0.52Al0.48As-system lattice matched to InP, as future sources for single and entangled photons for long-haul fiber-based quantum communication in the optical C-band. We achieved these quantum dots by local droplet etching via InAl droplets in an In0.52Al0.48As layer and subsequent filling of the holes with In0.53Ga0.47As. Here, we present detailed investigations of the hole morphologies measured by atomic force microscopy. Statistical analysis of a set of nanoholes reveals a high degree of symmetry for nearly half of them when etched at optimized temperatures. Overgrowth with 50–150 nm In0.52Al0.48As increases their diameter and elongates the holes along the [01̄1]-direction. By systematically scanning the parameter space, we were able to fill the holes with In0.53Ga0.47As, and by capping the filled holes and performing photoluminescence measurements, we observe photoluminescence emission in the O-band up into the C-band depending on the filling height of the nanoholes.
Site-controlled Ga droplets on AlGaAs substrates are fabricated using area selective deposition of Ga through apertures in a mask during molecular beam epitaxy (MBE). The Ga droplets can be crystallized into GaAs quantum dots using a crystallization step under As flux. In order to model the complex process, including the masked deposition of the droplets and a reduction of their number during a thermal annealing step, a multiscale kinetic Monte Carlo (mkMC) simulation of self-assembled Ga droplet formation on AlGaAs is expanded for area-selective deposition. The simulation has only two free model parameters: the activation energy for surface diffusion and the activation energy for thermal escape of adatoms from a droplet. Simulated droplet numbers within the opening of the aperture agree quantitatively with the experimental results down to the perfect site-control, with one droplet per aperture. However, the model parameters are different compared to those of the self-assembled droplet growth. We attribute this to the presence of the mask in close proximity to the surface, which modifies the local process temperature and the As background. This approach also explains the dependence of the model parameters on the size of the aperture.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.