The discovery of stable two-dimensional (2D) materials has effectuated a rapid evolution of skin conformal sensors for health monitoring via epidermal electronics. Among the newly discovered 2D materials, MXene stands out as a solutionprocessable 2D material allowing easy fabrication of highly conductive thin films with the potential to realize flexible skin conformal sensors. Here, we present a successful demonstration of a Ti 3 C 2 −MXene resistor as an extremely sensitive strain sensor in the form an ultrathin skin mountable temporary tattoo. The skin conformability and form factor afforded by the sensor promises inconspicuous and continuous monitoring of vital health parameters of an individual, like the pulse rate, respiration rate, and surface electromyography. The sensor serves as a single conduit for sensing the respiration rate and pulse, dispensing with the need of mounting multiple sensors. Its remarkably high sensitivity with a gauge factor of ∼7400 has been ascribed to development of nanocracks and their propagation through the film upon application of strain. The fast response and highly repeatable sensor follows easy fabrication steps and can be patterned into any shape and size using a laser.

This paper presents development and performance assessment of an innovative and a highly potent graphene-electrolyte capacitive sensor (GECS) based on the supercapacitor model. Although graphene has been widely researched and adapted in supercapacitors as electrode material, this combination has not been applied in sensor technology. A low base capacitance, generally the impeding factor in capacitive sensors, is addressed by incorporating electric double layer capacitance in GECS, and a million-fold increase in base capacitance is achieved. The high base capacitance (∼22.0 μF) promises to solve many inherent issues pertaining to capacitive sensors. GECS is fabricated by using thermally reduced microwave exfoliated graphene oxide material to form interdigitated electrodes coated with solid-state electrolyte which forms the double layer capacitance. The capacitance response of GECS on subjecting to strain is examined and an enormous operating range (∼300 nF) is seen, which is the salient feature of this sensor. The GECS showed an impressive device sensitivity of 11.24 nF kPa-1 and good immunity towards noise i.e. lead capacitance and stray capacitance. Two regimes of operation are identified based on the procedure of device fabrication. The device can be applied to varied applications and one such biomedical application of breath pattern monitoring is demonstrated.

The human body is punctuated with wide array of sensory systems that provide a high evolutionary advantage by facilitating formation of a detailed picture of the immediate surroundings. The sensors range across a wide spectrum, acquiring input from noncontact audiovisual means to contact‐based input via touch and taste. The ambit of sensing can be extended further by imparting the body with increased noncontact sensing capability through the phenomenon of electrostatics. Here, a graphene‐based tattoo sensor is presented for proximity sensing, employing the principle of electrostatic gating. The sensor shows a remarkable change in resistance upon exposure to objects surrounded with static charge on them. Compared to prior work in this field, the sensor demonstrates the highest recorded proximity detection range of 20 cm. It is ultrathin, highly skin conformal, and comes with a facile transfer process such that it can be tattooed on the human skin, unlike other graphene‐based proximity sensors reported before. Present work details the operation of wearable proximity sensor while exploring the effect of mounting body on the working mechanism. A possible role of the sensor as an alerting system against unwarranted contact with objects in public places especially during the current COVID‐19 pandemic is also explored.

Biomonitoring wearable sensors based on twodimensional nanomaterials have recently elicited keen research interest and potential for a new range of flexible nanoelectronic devices. Practical nanomaterial-based devices suited for real-world service, which exhibit first-rate performance while being an attractive accessory, are still distant. We report a multifunctional flexible wearable sensor fabricated using an ultrathin percolative layer of graphene nanosheets on laser-patterned gold circular interdigitated electrodes for monitoring vital human physiological parameters. This graphene on laser-patterned electrode (GLE) sensor displays an excellent strain resolution of 245 με (0.024%) and a record high gauge factor of 6.3 × 10 7 , with exceptional stability and repeatability in its operating range. The sensor was tested for human physiological monitoring like measurement of heart rate, breathing rate, body temperature, and hydration level, which are vital health parameters, especially considering the current pandemic scenario. The sensor also served in applications such as a pedometer, limb movement tracker, and control switch for human interaction. The innovative laser-etch process used to pattern gold thin-film electrodes, with the multifunctional incognizable graphene layer, provides a technique for integrating multiple sensors in a wearable band. The reported work marks a giant leap from the conventional banal devices to a highly marketable multifunctional sensor array as a biomonitoring fashion accessory.

We report a novel strain sensor based on reduced graphene oxide (rGO) with palladium (Pd) nano-composite. The sensor was fabricated on the SS304 stainless-steel substrate using a screen-printing method. Graphene oxide was synthesized using a modified Hummer’s method and reduced using a chemical route. Field emission-scanning electron microscope, x-ray diffraction and Raman spectroscopy were used to characterize the as-synthesized nano-composite. The as-fabricated strain sensor was tested for tensile strain using Micro-universal Test Machine and the change in resistance for different strains was recorded. The sensor response was observed to be stable and linear within the applied strain range of 0–3000 microstrains, and an average gauge factor of 42.69 was obtained in this range.