Tilia mexicana es una especie en peligro de extinción, por lo que es necesario desarrollar métodos de reproducción que aseguren su supervivencia. Los objetivos del presente estudio fueron propagar asexualmente, así como evaluar el efecto de diferentes épocas de colecta, la longitud y diámetro de estacas en la emisión de raíces, mediante AIB. En el material de la primera fecha se observó 39.3% del total de tallos enraizados. Dado que en tres de los cuatro meses en los que se obtuvieron las estacas, el índice de enraizado fue de 0%, el análisis estadístico sólo se realizó con los datos de septiembre La óptima proliferación de raíces (51.1%) se registró en tallos de 20 cm de longitud y 1.5 cm de diámetro, que formaron 3.06 raíces/estaca de 0.9 cm de longitud con un diámetro promedio de 0.47 cm. Se tuvo diferencia significativa (P>F=0.012) entre los tratamientos para el diámetro de la raíz. Las estacas de mayores dimensiones produjeron raíces más cortas y diámetro más grande, y en las pequeñas se los resultados fueron opuestos. La formación de callo varió con la día de colecta y el tamaño de los propágulos, aunque las del mes de diciembre presentaron el porcentaje más alto (30.1%). La mejor respuesta de enraizamiento ocurrió en las estacas correspondientes a la última etapa del verano, ya que coincide con la emisión de yemas del árbol, es decir, hay un efecto estacional que favorece la capacidad de enraizamiento.
La baja calidad de la planta producida en los viveros forestales de México es una de las causas del poco éxito que se tiene en las plantaciones. Esto provoca que, a nivel nacional, la tasa anual de sobrevivencia, al año de plantación sea de aproximadamente 50 %. De ahí, que el objetivo del presente estudio sea evaluar la calidad de planta, mediante índices morfológicos y fisiológicos, producida en el vivero forestal “La Dieta”, del municipio Zitácuaro, Michoacán. El ciclo de producción de la planta fue de mantenimiento, producidas en bolsa de polietileno negro. Para ello se obtuvo por muestreo al azar una muestra de 410 plantas. Se evaluó la altura, diámetro del cuello, biomasa seca total y se determinó el Índice de Robustez (IR), Índice de Lignificación (IL) y el Índice de Calidad de Dickson (ICD); así como la concentración de nutrimentos (N-P-K), y el contenido de carbono y lignina. Los resultados mostraron que la planta superó los valores para calificarla como calidad alta; con 6.0 cm en altura y 5.0 mm de diámetro para especies de crecimiento de hábito cespitoso, y de 15.0 cm en altura y 4.0 mm de diámetro para las de crecimiento normal. Los valores promedios de ICD fueron 2.16 en Pinus michoacana, 1.54 en Pinus ayacahuite y 1.77 para Cupressus lindleyi, que corresponden a una calidad alta. Las concentraciones de nutrimentos resultaron diferentes en todos los casos; con deficiencias de N y P en C. lindleyi, y K en P. michoacana, clasificándolas de calidad baja.
RESUMENLa función de los envases utilizados en la propagación de especies forestales es contener el sustrato que abastece a las raíces de agua, aire, nutrimentos minerales y provee de soporte físico a la planta durante su permanencia en el vivero. El objetivo de este trabajo fue evaluar la factibilidad técnica de utilizar contenedores biodegradables (de fibra de coco), en comparación con charolas Styroblock de 60 y 77 cavidades para la producción de Enterolobium cyclocarpum y Tabebuia rosea. Se aplicó un diseño completamente al azar, con seis tratamientos y cuatro repeticiones. A los tres meses de estancia en vivero, los individuos de E. cyclocarpum en los contenedores de fibra de coco lograron una altura de 24.8 cm, que fue significativamente superior (Pr > F= <0.0001) a los valores registrados cuando se usaron charolas de 60 y 77 cavidades (14.9 cm). El diámetro del cuello de la raíz de T. rosea y E. cyclocarpum en contenedores de fibra de coco mostraron diferencias significativas (Pr>F= <0.0001), que resultaron en dos grupos (Tukey α=0.05); el primero con los mayores diámetros (6.2 a 5.5 mm) para ambas especies en los envases biodegradables y el segundo que incluye las charolas de 60 y 77 cavidades (2.7 a 3.3 mm). En los dos taxa, la biomasa total (aérea y radical) fue superior en contenedores de fibra de coco, aunque los valores para E. cyclocarpum (4.69 g) fueron superiores significativamente respecto a los de T. rosea (3.66 g). Estos envases no contaminan y en ellos se producen plantas de alta calidad.Palabras clave: Contenedores de poliestireno, contenedores de fibra de coco, Enterolobium cyclocarpum (Jacq.) Griseb., propagación de plantas, Tabebuia rosea (Bertol) DC., viveros forestales. ABSTRACTThe function of any container for the propagation of forest species is to contain the substrate that supplies roots with water, air, mineral nutrients and provides physical support to the plant while it stays in the nursery. The aim of this study was to assess the technical feasibility of using biodegradable containers (made from coconut fiber) compared with trays of 60 and 77 Styroblock cavities for the propagation of two tropical forest species, Enterolobium cyclocarpum and Tabebuia rosea. A completely randomized design with six treatments and four repetitions was used. After three months in the nursery, the plants of E. cyclocarpum in coconut fiber containers reached a height of 24.8 cm, which was significantly higher (Pr> F = <0.0001) in regard to plants of the same species that were placed into trays of 60 and 77 cavities (14.9 cm). The diameter of the neck of the root of T. rosea and E. cyclocarpum in the first kind of containers showed significant differences (Pr> F = <0.0001), which resulted in two groups (Tukey α = 0.05); the first one, with the largest diameters (6.2 to 5.5 mm) in the two species that were in the biodegradable containers and the second, which includes the trays of 60 and 77 cavities (2.7 to 3.3 mm). In both taxa the total biomass (aerial and root) was higher in coconut fiber containers, ...
Las plantaciones forestales en la Sierra Purhépecha, Michoacán, presentan bajos incrementos en altura y diámetro; así como en supervivencia, debido a que se establecieron sin un objetivo específico, con una elección inadecuada de especies, densidades incorrectas en relación con la capacidad productiva de los terrenos, y carecen de seguimiento. La escasa información sobre el crecimiento y desarrollo de las plantaciones con especies exóticas motivó la realización del presente estudio, cuyo objetivo fue evaluar el desarrollo en diámetro, altura y supervivencia de una plantación de Pinus greggii establecida con dos espaciamientos 2.0 x 4.0 y 2.50 x 4.0 m, en terrenos de la Comunidad Indígena de Cheranástico, municipio Paracho, Michoacán en julio de 1999. El área se caracteriza por tener suelo Andosol, topografía ligeramente ondulada, pendiente del 5% y una altitud de 2,293 m. La planta fue producida en contenedores, con capacidad de 160 celdas. Para la preparación del terreno se realizó un barbecho a 30 cm de profundidad. Se utilizó un diseño experimental de bloques al azar con dos tratamientos y seis repeticiones, la unidad experimental estuvo constituida por 60 árboles. Los resultados a seis años, mostraron diferencias significativas entre tratamientos para las variables altura y diámetro, no así en supervivencia. Las densidades ensayadas permiten evaluar la variación del crecimiento y comportamiento de P. greggii para plantaciones agroforestales, y con base en la capacidad productiva del suelo se deberá emplear el espaciamiento de 2.0 x 4.0 m, en el cual se obtuvo un mejor crecimiento en altura y diámetro.
El estudio se realizó en un rodal con regeneración natural de Pinus pseudostrobus infestado por Arceuthobium globosum susbp. grandicaule en la Comunidad Indígena de Nuevo San Juan Parangaricutiro, Michoacán. El objetivo fue evaluar el impacto de tres dosis de algas diatomeas (Muérdago Killer® al 7.5, 10 y 15%), un tratamiento comercial a base del ácido 2-cloroetil fosfórico (Etephon®) más testigo absoluto, para el manejo del muérdago. El diseño experimental consistió en bloques al azar, con cinco tratamientos y seis repeticiones. Los valores de infestación previa, según escala de Hawksworth, fueron 3, 3, 2.58, 1.83 y 2.08. Se obtuvieron diferencias significativas (Pr>F = <0.0001) a 30 y 45 días después de la aplicación de los productos. A los 30, el testigo absoluto preservó infestación 2.08, que difiere del resto de tratamientos con valor 0.42, 0.5, 0.6 y 0.6 para Etephon® 2,500 ppm y Muérdago Killer® 10, 7.5 y 15%, respectivamente. A los 45 días se alcanzaron valores de 0.0, 0.08, 0.17 y 0.17 para Etephon® 2,500 ppm y Muérdago Killer® 15, 7.5 y 10% respectivamente. Los tratamientos presentaron igual impacto de supresión sobre la parte aérea de Arceuthobium globosum ssp. grandicaule cuando se usó Muérdago Killer® 7.5, 10 y 15%; así como Etephon® 2,500 ppm. La muerte del área foliar sobrevino a los 15 días y la caída de la parte aérea a los 45. La mayor eficacia del Muérdago Killer® ocurrió al 7.5% en 200 L de agua. Con ninguna dosis se indujeron síntomas de fitotoxicidad a la planta hospedera.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.