This research presents an advanced characterization of Balsa wood waste to evaluate its potential use as raw material for Oriented Strand Board (OSB) panel. For that, chemical, thermal and microstructural characterization of the Balsa wood particles were performed followed by the production and characterization of OSB agglomerated with castor oil polyurethane resin (Pu-Castor oil). The results indicated that the lignin content of the Balsa wood waste was lower than the content found in Pinus spp. wood, used in the industrial production of OSB panels, demonstrating the need for higher resin contents to ensure a perfect agglomeration of the particles. Microstructural analysis indicated that the Balsa wood presented characteristics to be used as a constituent raw material of OSB with Pu-Castor oil. The physical-mechanical characterization indicated that the material can be classified as OSB type 1 in accordance with the EN 300:2006 guidelines and is suitable for application in internal environments.
Este trabalho teve como objetivo produzir e ensaiar painéis OSB (Oriented Strand Board) com resíduo de madeira Balsa (Ochroma Pyramidale) proveniente de reflorestamento, aglomerados com resinas uréia-formaldeído (UF), fenolformaldeido (FF) e poliuretana à base de óleo mamona (PU-Mamona), e os caracterizar por meio de ensaios termo-físico-mecânicos e microestruturais. A escolha da madeira Balsa residual ocorreu devido a fatores como baixa densidade, alta resistência específica, elevada taxa de crescimento e disponibilidade de matéria-prima. Inicialmente as partículas de madeira Balsa foram caracterizadas por ensaios físicos, químicos (densidade por picnometria de gás hélio, pH e composição química) e microestruturais (microscopia eletrônica de varredura-MEV, espectroscopia de infra-vermelho-FTIR, Difração de Raios-X-DRX e termogravimetria-TG). As resinas foram caracterizadas por ensaios microestruturais (DRX, FTIR e TG-DSC). A partir dessas informações foram produzidos painéis de madeira Balsa em escala laboratorial de baixa e média dendidade com partículas do tipo strand de resíduo de madeira Balsa aglomerado com as referidas resinas, os quais foram caracterizados por ensaios físicos (inchamento em espessura, absorção de água e densidade aparente), mecânicos (flexão estática e adesão interna), microestruturais (MEV, FTIR, DRX e TG-DSC) e ensaios de condutividade térmica. Os resultados obtidos foram comparados com as indicações da norma européia EN 300:2006 e indicaram que apenas os painéis OSB de madeira Balsa residual aglomerada com resina poliuretana à base de óleo de mamona atendem os requisitos estabelecidos para painéis OSB de Classe 1 de uso interno e não-estrutural.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.