An aqueous process for the recovery of oil bodies from rapeseed using sodium bicarbonate-based soaking and grinding media (pH 9.5) was investigated. The effect of the ratio between seed and mass of media during grinding and molarity of the medium used on oil body integrity, purity and storage stability have been studied. The grinding of seeds in solution at a ratio of 1:7 (w/w) significantly improved the quality of oil body suspension to a size more in-line with that seen in vivo (average D of 1.19µm). The purity and the composition of the recovered oil bodies depends on the molarity of medium used; the use of a sodium bicarbonate solution (pH 9.5, 0.1M) in the grinding and washing steps produced oil body preparations with the same purity as that resulting from washing a crude preparation with 9M urea. The resultant emulsion had improved physical stability over a storage period of one month.

A supply of pure, intact oil bodies is essential for carrying out morphological and biochemical studies of these plant organelles and exploring their application. Preparation requires a carefully controlled breakage of plant cells, followed by separation of the oil bodies from cytoplasm and cell debris. This paper focuses on the recovery and characterisation of oil bodies from pecan nuts where no work has been published to date. The results showed that soaking softens the nut tissue and appears to reduce the damage to oil bodies during grinding and centrifugal force must be carefully selected to minimise oil bodies damage on recovery. A 24 h soaking time coupled with a 5500 RCF recovery force allows for the recovery of intact pecan nut oil bodies.