El presente trabajo se llevó a cabo en el Campo Experimental El Palmar, Veracruz con el objetivo de evaluar el crecimiento en altura y diámetro, de una plantación de cuatro especies asociadas (Cedrela odorata–Cordia alliodora y Tectona grandis-Swietenia macrophylla). En el primer grupo se consideraron cuatro tratamientos experimentales: T1) Sin fertilización y procedencia local; T2) Sin fertilización y procedencia foránea; T3) Con fertilización y procedencia local; T4) Con fertilización y procedencia foránea. Para el segundo se incluyó un solo tratamiento T1) Sin fertilización y procedencia local en cuatro parcelas ubicadas en los extremos de la plantación. El análisis de varianza se realizó, para cada asociación, con un arreglo de parcelas dividas bajo un modelo de medidas repetidas. En general, se determinó que en ambas se presentaron diferencias altamente significativas (p<0.0001) en altura y diámetro. Destacó el tratamiento (T1) como el mejor. T. grandis fue la especie que registró el mayor crecimiento promedio (diámetro = 10.9 cm, altura = 9.83 m) y la tasa de crecimiento más alta (altura = 1.96 m año-1 diámetro = 2.3 cm año-1), mientras que C. alliodora tuvo el menor crecimiento promedio (diámetro = 5.7 cm, altura = 4.89 m) y la menor tasa de crecimiento (altura = 0.97 m año-1 y diámetro = 1.3 cm año-1). Se concluyó que conocer la fuente de germoplasma es más importante para las plantaciones que la aplicación de fertilizante.
En México hay avances en el mejoramiento genético de Cedrela odorata. El material mejorado debe tener características distinguibles, homogéneas y estables cuando crece en diferentes sitios para registrar la propiedad intelectual. El objetivo del presente estudio fue evaluar la repetibilidad de descriptores morfológicos en clones de C. odorata cuya reproducción vegetativa ha sido más exitosa por injertos, con el fin de identificar genotipos superiores para el registro de su propiedad intelectual. Se evaluaron 90 clones producidos por injerto en dos sitios contrastantes (ensayos clonales) y en un banco clonal. Se seleccionaron 19 caracteres: 12 cuantitativos y 7 cualitativos relacionados con crecimiento, fuste, copa y hojas; en el banco clonal solo se evaluaron hojas. La mayoría de los descriptores presentaron coeficientes de variación > 20 %, o alta variabilidad fenotípica entre clones. El Análisis de Componentes Principales reveló que los descriptores que contribuyeron significativamente y resultaron consistentes en los tres sitios de evaluación fueron longitud y ancho de hoja, longitud del peciolulo y ancho de foliolos secundarios. También, contribuyó el diámetro y la rectitud del fuste. El análisis de agrupamiento evidenció poca relación entre los descriptores morfológicos con los grupos de clones y procedencias en cada sitio de evaluación. Los grupos creados por el análisis de agrupamiento fueron distintos en los tres sitios, y ningún clon se discriminó de manera consistente entre sitios. La interacción genotipo x ambiente y el portainjerto diferente en cada rameto pudieran reducir la posibilidad de repetibilidad en los caracteres y el registro de clones superiores.
This study investigated the physical properties of wood from branches of 10 selected clones of red cedar (Cedrela odorata L.), focusing on determining the basic density, anisotropy ratio, and linear and volumetric shrinkage of the wood samples. The objective of this study was to know the wood properties variation related to wood quality to improve the selection of superior clones for the establishment of forest plantations with this species. Wood samples were collected from the first living branch of three trees per clone. Two sections of 5 cm thickness were obtained from each branch, and 2 cm cubes were taken from each section. These samples were used to determine the volume and dimensions of the wood in saturated and anhydrous conditions. Basic density was calculated by dividing the anhydrous weight (dried at 103 ± 2 °C) by the saturated volume. Total shrinkage was determined by calculating the ratio between the initial and final linear dimensions or volume change. The collected data underwent variance analysis and mean comparison using Tukey's method (α = 0.05). The results revealed significant differences (p ≤ 0.05) in the wood properties among the clones. The average values for basic density ranged from 320.08 to 438.19 kg/m3. The average total linear shrinkage varied between 5.00% and 6.47% in the tangential direction, 2.95% and 4.38% in the radial direction, and 0.25% and 0.46% in the longitudinal direction. The average volumetric shrinkage ranged from 8.07% to 10.88%, and the anisotropy ratio (ANR) ranged from 1.27 to 1.69. Based on the values of wood basic density and ANR, it can be concluded that clones 4 and 8 exhibit the best wood properties. This study confirms that wood basic density, shrinkage, and ANR are additional parameters that contribute to the improved selection of red cedar clones, along with their growth characteristics.
RESUMENEl objetivo del presente estudio fue evaluar el crecimiento y desarrollo de una asociación de ocho especies forestales tropicales en sus primeros cinco años, bajo cuatro tratamientos: procedencia local sin fertilización, procedencia foránea sin fertilización, procedencia local con fertilización y procedencia foránea con fertilización y un primer aprovechamiento de Gmelina arborea al cuarto año. Se aplicó un modelo mixto para mediciones repetidas; se analizaron las variables: altura, diámetro normal y diámetro de copa, y se observó que, en general, la procedencia local con y sin fertilización registró los mayores valores promedio. La alta densidad favoreció el desarrollo de Tabebuia donnell-smithii y perjudicó el de las demás especies. El aclareo de Gmelina arborea permitió que se extendiera notablemente la copa de Tectona grandis y el diámetro normal de Tabebuia donnell-smithii, no así la altura en los otros taxa. Por último, las más sobresalientes fueron Gmelina arborea (altura = 6.75 m; diámetro normal = 0.08 m; diámetro de copa = 3.56 m) y Tabebuia donnell-smithii (altura = 4.26 -4.65 m; diámetro normal = 0.04 -0.05 m; diámetro de copa = 2.15 -2.34 m); las mayores tasas de crecimiento se verificaron en altura y diámetro normal promedio en Gmelina arborea (4.23 m año -1 y de 0.044 m año -1 ) y Tabebuia donnell-smithii (1.47 m año -1 y de 0.017 m año -1 ). ABSTRACTA five years old mixed plantation of eight associated species was assessed into a complete block experimental design, with four treatments and three replications. Treatments considered on: local provenance with no fertilization (LPNF), foreign provenance with no fertilization (FPNF), local provenance with fertilization (LPWF) and foreign provenance with fertilization (FPWF). Gmelina arborea was completely cut in the fourth year. A mixed model for repeated measurements was tested analyzing the following variables: height (H), diameter at breast height (DBH) and crown diameter (CD) from the eight species. As a result, LPWF and LPNF produced the highest average values, in general. The two species with best development were Gmelina arborea (H= 6.75 m; DBH = 0.08 m; CD = 3.56 m) and Tabebuia donnell-smithii (H = 4.26-4.65 m; DBH = 0.04-0.05 m; CD = 2.15-2.34 m). The largest average growth rates in H and DBH were for Gmelina arborea (4.23 m year -1 and of 0.044 m year -1 , respectively) and Tabebuia donnell-smithii (1.47 m year -1 and of 0.017 m year -1 , respectively).
Cedrela odorata es la segunda especie maderable más importante en Mesoamérica, por la alta calidad de su madera. En México, la situación actual que guardan sus poblaciones en toda su área de distribución es incierta. El objetivo del presente estudio fue determinar las condiciones de las poblaciones de cedro en 15 estados de la república mexicana y 67 sitios, con respecto al análisis de las dimensiones dasométricas y porcentaje del ataque de Hysipyla grandella. Los datos registrados fueron número de árbol, coordenadas geográficas, nombre del municipio, altitud, diámetro normal, altura total, altura de fuste, presencia o ausencia de ataque por insecto barrenador, así como las características del sitio. Sus coordenadas fueron registradas mediante GPS e incorporadas al ambiente de Sistema de Información Geográfica ArcView 3.2. ESRI. Los resultados indican que las poblaciones naturales distribuidas en el norte del país están muy reducidas, o en lugares inaccesibles. En el sureste, la especie ya no existe en condiciones naturales; hay árboles en áreas de traspatio, zonas urbanas y plantaciones comerciales. El análisis estadístico de las variables dasométricas reveló diferencias significativas (p<0.05) entre municipios dentro de los estados y entre estados. El porcentaje promedio a nivel nacional de la presencia de H. grandella fue de 80.5.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.