The materials which incorporate CHI3 OR BaSO4 as radiopacifying agents are expected to be significantly more radiopaque on a digital sensor than on film. During clinical practice one should concern to the quality of contrast assessment obtained by digital according to conventional radiography.
This article presents a literature review on the resin bond to zirconia ceramic. Modern esthetic dentistry has highly recognized zirconia, among other ceramic materials. Biocompatibility of zirconia, chemical and dimensional stability, excellent mechanical properties, all together could guarantee optimal therapeutical results in complex prosthodontic reconstruction. On the other hand, low thermal degradation, aging of zirconia as well as problematic bonding of zirconia framework to dental luting cements and tooth structures, opened the room for discussion concerning their clinical durability.The well known methods of mechanical and chemical bonding used on glass-ceramics are not applicable for use with zirconia. Therefore, under critical clinical situations, selection of the bonding mechanism should be focused on two important points: high initial bond strength value and long term bond strength between zirconia-resin interface. Also, this paper emphases the use of phosphate monomer luting cements on freshly air-abraded zirconia as the simplest and most effective way for zirconia cementation procedure today.
The investigated dental cements revealed different sealing abilities. The use of resin cement resulted in the percentage of 0 microleakage scores. Due to this feature, the resin cement is to be recommended in everyday clinical practice.
This study examined the possible correlation between the degree of conversion (DC) and the amount of substances eluted from three commercial cured resin-based cements. The DC of the various resin-based cements was measured by Raman spectroscopy, while the quantity of unreacted monomers released from the cement matrix (triethylene glycol dimethacrylate, TEGDMA, urethane dimethacrylate, UDMA, 2-hydroxyethyl methacrylate, HEMA and bisphenol A) was determined by high pressure liquid chromatography (HPLC). The obtained results, after multiple statistical evaluation (one way ANOVA, LSD post hoc test), showed no significant differences in the DC values between the resin cements. On the contrary, the results of the HPLC analysis depicted statistically significant differences between the three materials with respect to the amount of leached monomers. In addition, no correlation between the DC and the amount of eluted substances from the tested cured composite cements was found.
Contemporary dentistry is, first of all, characterized by diverse accelerated development, owing to improvements of information and other technologies, as well as the development of dental materials (shape-memory biomaterials, nanomaterials, biomaterials for application in tissue engineering, etc.). Expert doctrinaire attitudes move from the direction of operative interventions, whereby disease and acute symptoms are primarily treated, towards the strengthening of oral health by minimally invasive procedures. A particular place in patients' total rehabilitation belongs to numerous esthetic procedures which, to a large extent, make up a wants-based service, led by the patients' needs and affinities. This paper deals with differences between cosmetic and esthetic dentistry. The complexity of esthetic dentistry, which favors therapy with the change of function parameters in care for the patient, is emphasized. On the other hand, more attention is paid to the need to know and respect ethical and marketing principles that follow any activity of dentists, starting from the first contact with the patient, the selection of certified materials, to the implementation of the appropriate treatment plan. Well-directed communication and comprehensive awareness of the patient, the use of the visual analog scale, consideration of realistic resources in therapy, and the acceptance of de Bono model of adopted parallel thinking are determinants which help dentists define a problem adequately, find quality solutions, open alternative solutions, and reduce the potential risks in patients' therapy.
In the light of the results obtained, it could be reasonably concluded that retention and resistance of the restoration is in inverse proportion to convergence angle of the prepared teeth. But, at a constant convergence angle, retention and resistance increase with rising length and diameter.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.