Driven by global warming, a relentless march towards increased fuel efficiency has resulted in increased firing temperature for HA-class engines without an increase in baseload emissions. Moreover, emissions compliance for CO, NOx, and unburned hydrocarbons are desired over increased range in gas turbine load. In addition, exceptional gas turbine operational flexibility is desired to address potential intermittency due to the penetration of renewables in the electrical grid. Staged/sequential combustion is a state of the technology to provide operational flexibility and reduced emissions in power generation gas turbines. GE Power’s 7HA-class gas turbine combustion system combines GE’s proven DLN-2.6+ combustion technology, that has run reliably for over 1.3 million fired hours across more than eighty 9FA.03, 9F.05 & 7FA gas turbine engines, with an axially fuel staged system (AFS). Axially staging combustion to two zones allows for increased firing temperature at baseload (while maintaining the same NOx level) by operating the later/second stage hotter than the first/primary stage. During low load operation as the gas turbine firing temperature is reduced, percentage fuel split in the staged fuel system can either be reduced significantly or turned off and thereby keeping the overall combustion system into emissions compliance over a wider range of firing temperatures. This paper presents both the development testing of the staged combustion in the FA and HA class gas turbine combustion system rigs at GE Power’s Gas Turbine Technology Laboratory and the validation testing of staged combustion system for the 7HA.01 engine completed during Spring 2016 at GE Power’s engine test facility in Greenville, SC. The paper also discusses the significant simplification of operational principle and flexibility of startup, loading and baseload operation of the 7HA combustion system. Discussion of engine test results will show how axial fuel staging was utilized to demonstrate emissions compliance ( NOx (15% O2) < 25 ppm; CO < 9 ppm), operation from 14% load to 100% load with low combustion dynamics and also to enable wide wobbe capability, which is a normalized measure of fuel flexibility.
Enabled by national commercialization of massive shale resources, Gas Turbines continue to be the backbone of power generation in the US. With the ever-increasing demand on efficiency, GT combustion sections have evolved to include shorter combustion lengths and multiple axial staging of the fuel, while at the same time operating at ever increasing temperatures. This paper presents the results of very detailed Large Eddy Simulations of one (or two) combustor can(s) for a 7HA GE Gas Turbine Engine over a range of operating parameters. The model of the simulated combustor can(s) includes (include) all the details of the combustor from compressor diffuser to the end of the stationary part of the first stage of the turbine. It includes the geometries of multiple pre-mixers within the combustion can(s) and the complete design features for axial fuel staging. All simulations in this work are performed using the CharLES flow solver developed by Cascade Technologies. CharLES is a suite of massively parallel CFD tools designed specifically for multiphysics LES in high-fidelity engineering applications. Thermo acoustic results from LES were validated first in the physical GE lab and then in full-engine testing. Both the trend as well as the predicted amplitudes for the excited axial dominant combustion mode matched the data produced in the lab and in the engine. The simulations also revealed insight into the ingestion of hot gases by different hardware pieces that may occur when machine operates under medium to high combustion dynamics amplitudes. This insight then informed the subsequent design changes which were made to the existing hardware to mitigate the problems encountered.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.