Modern orb-weaving spiders have evolved well-designed adhesives to capture preys. This adhesive is laid on a pair of axial silk fi bres as micron-sized glue droplets that are composed of an aqueous coat of salts surrounding nodules made of glycoproteins. In this study, we measure the adhesive forces required to separate a small microscopic probe after bringing it in contact with a single glue droplet. These forces are highly rate-dependent and are two orders of magnitude higher than the capillary forces. The glycoproteins in the glue droplets behave as a viscoelastic solid and the elasticity is critical in enhancing adhesion caused by specifi c adhesive ligands. These results have important implications in mimicking bioadhesives.

We compare the prey capture glues produced by orb-weaving spiders (viscid glue) and their evolutionary descendents, the cobweb-weaving spiders (gumfoot glue). These glues are produced in homologous glands but exhibit contrasting structure, properties and response to changing humidity. Individual glue droplet stretching measurements indicate that the gumfoot glue behaves like a viscoelastic liquid in contrast to the viscid glue, which behaves like a viscoelastic solid. Moreover, the gumfoot glue is largely humidity-resistant – elasticity and adhesion are constant across variation in humidity and there is weak volume-dependence. Viscid glue, however, is highly humidity-sensitive. The glue expands an order of magnitude and demonstrates a monotonous reduction in elasticity under increased humidity, while glue adhesion optimizes at intermediate levels of humidity. We suggest that observed differences are due to different ‘tackifiers' used in these systems. These results shall inspire future efforts in fabricating stimuli-resistant and stimuli-sensitive materials.

SUMMARYThe abrupt halt of a bumble bee's flight when it impacts the almost invisible threads of an orb web provides an elegant example of the amazing strength and toughness of spider silk. Spiders depend upon these properties for survival, yet the impressive performance of silk is not limited solely to tensile mechanics. Here, we show that silk also exhibits powerful cyclic contractions, allowing it to act as a high performance mimic of biological muscles. These contractions are actuated by changes in humidity alone and repeatedly generate work 50 times greater than the equivalent mass of human muscle. Although we demonstrate that this response is general and occurs weakly in diverse hydrophilic materials, the high modulus of spider silk is such that it generates exceptional force. Furthermore, because this effect already operates at the level of single silk fibers, only 5 μm in diameter, it can easily be scaled across the entire size range at which biological muscles operate. By contrast, the most successful synthetic muscles developed so far are driven by electric voltage, such that they cannot scale easily across large ranges in cross-sectional areas. The potential applicability of silk muscles is further enhanced by our finding that silkworm fibers also exhibit cyclic contraction because they are already available in commercial quantities. The simplicity of using wet or dry air to drive the biomimetic silk muscle fibers and the incredible power generated by silk offer unique possibilities in designing lightweight and compact actuators for robots and micro-machines, new sensors, and green energy production.

SUMMARYSpider dragline silk has enormous potential for the development of biomimetic fibers that combine strength and elasticity in low density polymers. These applications necessitate understanding how silk reacts to different environmental conditions. For instance, spider dragline silk 'supercontracts' in high humidity. During supercontraction, unrestrained dragline silk contracts up to 50% of its original length and restrained fibers generate substantial stress. Here we characterize the response of dragline silk to changes in humidity before, during and after supercontraction. Our findings demonstrate that dragline silk exhibits two qualitatively different responses to humidity. First, silk undergoes a previously unknown cyclic relaxation-contraction response to wetting and drying. The direction and magnitude of this cyclic response is identical both before and after supercontraction. By contrast, supercontraction is a 'permanent' tensioning of restrained silk in response to high humidity. Here, water induces stress, rather than relaxation and the uptake of water molecules results in a permanent change in molecular composition of the silk, as demonstrated by thermogravimetric analysis (TGA). Even after drying, silk mass increased by ~1% after supercontraction. By contrast, the cyclic response to humidity involves a reversible uptake of water. Dried, post-supercontraction silk also differs mechanically from virgin silk. Post-supercontraction silk exhibits reduced stiffness and stress at yield, as well as changes in dynamic energy storage and dissipation. In addition to advancing understanding supercontraction, our findings open up new applications for synthetic silk analogs. For example, dragline silk emerges as a model for a biomimetic muscle, the contraction of which is precisely controlled by humidity alone.

The evolutionary origin of modern viscid silk orb webs from ancient cribellate silk ancestors is associated with a 95% increase in diversity of orb-weaving spiders, and their dominance as predators of flying insects, yet the transition's mechanistic basis is an evolutionary puzzle. Ancient cribellate silk is a dry adhesive that functions through van der Waals interactions. Viscid threads adhere more effectively than cribellate threads because of the high extensibility of their axial silk fibers, recruitment of multiple glue droplets, and firm adhesion of the viscid glue droplets. Viscid silk's extensibility is permitted by the glue's high water content, so that organic and inorganic salts present in viscid glue droplets play an essential role in contributing to adhesion by sequestering the atmospheric water that plasticizes the axial silk fibers. Here, we provide direct molecular and macro-scale evidence to show that salts also cause adhesion by directly solvating the glycoproteins, regardless of water content, thus imparting viscoelasticity and allowing the glue droplets to establish good contact. This "dual role" of salts, plasticizing the axial silk indirectly through water sequestration and directly solvating the glycoproteins, provides a crucial link to the evolutionary transition from cribellate silk to viscid silk. In addition, salts also provide a simple mechanism for adhering even at the extremes of relative humidity, a feat eluding most synthetic adhesives.

spiders' cobwebs ensnare both walking and flying prey. While the scaffolding silk can entangle flying insects, gumfoot silk threads pull walking prey off the ground and into the web. Therefore, scaffolding silk needs to withstand the impact of the prey, whereas gumfoot silk needs to easily detach from the substrate when contacted by prey. Here we show that spiders accomplish these divergent demands by creating attachment discs of two distinct architectures using the same pyriform silk. A 'staple-pin' architecture firmly attaches the scaffolding silk to the substrate and a previously unknown 'dendritic' architecture weakly attaches the gumfoot silk to the substrate. Gumfoot discs adhere weakly, triggering a spring-loaded trap, while the strong adhesion of scaffolding discs compels the scaffolding threads to break instead of detaching. We describe the differences in adhesion for these two architectures using tapepeeling models and design synthetic attachments that reveal important design principles for controlled adhesion.

No abstract

We employ the adhesive web building strategy used by modern orb-weaving spiders to produce functional microthreads that are similar in structure (beads-on-a-string (BOAS) morphology) and adhesive properties to the capture-silk threads of the spider web. The diameter and spacing of droplets (beads) are controlled by varying the viscosity, velocity, and surface tension of the coating fluid. Using these functional threads, we also describe the behavior of the BOAS morphology during contact (mimicking the collision of an insect with the web) and during separation (mimicking insect rescue from the web). Our results show that the BOAS structure performs better than a cylindrical structure for adhesion, which may explain why this morphology is so prevalent in spider webs despite the cost of increasing the visibility of the web.