Over the past few decades, silicon-based solar cells have been used in the photovoltaic (PV) industry because of the abundance of silicon material and the mature fabrication process. However, as more electrical devices with wearable and portable functions are required, silicon-based PV solar cells have been developed to create solar cells that are flexible, lightweight, and thin. Unlike flexible PV systems (inorganic and organic), the drawbacks of silicon-based solar cells are that they are difficult to fabricate as flexible solar cells. However, new technologies have emerged for flexible solar cells with silicon. In this paper, we describe the basic energy-conversion mechanism from light and introduce various silicon-based manufacturing technologies for flexible solar cells. In addition, for high energy-conversion efficiency, we deal with various technologies (process, structure, and materials).

No abstract

No abstract

Link for citation: Nguyen Xuan Kha, Pham Xuan Son, Hoang Van Quy, Nguyen Tuan, Truong Quoc Thanh, Mai Huu Xuan, Tran Van Xuan.  Bach ho field geological features identification using  well logging data. Bulletin of the Tomsk Polytechnic University. Geo Аssets Engineering, 2023, vol. 334, no. 7, рр. 35-42. In Rus. The relevance. Well geophysics is considered as a typical method that can assist in determining the petrophysics properties of reservoirs and further location of the petroleum product-containing reservoirs. For reservoirs formed from fractured basement rock, studies on the petrophysics properties of fracture zones can contribute to the identification of petroleum products. The main aim. The study applied the cross-plotting method based on raw well-logging data to identify the possible correlation between the gamma-ray logging with well-logging including neutron porosity, sonic transient time, and bulk density in three wells (BH-433, BH-809, and BH-905) of Bach Ho field in the Cuu Long Basin, Vietnam. Methods. To deploy this study, well-logging data were integrated into formation of micro images and neutro, speed of sound, and density of the basement at the surveyed reservoir positions. Results. The results indicated that granite in the investigated zones responds to the two tight value ranges (no-oil exist zones) neutro (0,000–0,100) and speed of sound (46–64), and neutro (0,000–0,100) and density (2,375–2,750) while the value ranges deviate from 0,000–0,100, 46–64, and 2,375–2,750, respectively for neutro, speed of sound, and density are closely related to the good permeability and porosity zones (oil exist zones). Based on the findings, it can be confirmed that the cross-plotting analysis has contributed positively to the initial assessment of potential ranges of the oil reservoirs in Bach Ho field. The application of the cross-plotting method will contribute to enhancing the predictability of oil and gas in the reservoirs.

The use of composites such as hydroxyapatite (HA)/TiO2 in bioapplications has attracted increasing attention in recent years. Herein, for the enhancement wetting ability and biocompatibility, the HA/TiO2 composite was subjected to different treatments to improve nanoparticle (NP) distribution and surface energy with an aim of mitigating nanotoxicity concerns. The treatments included ultrasonication, high-temperature annealing, and addition of a dispersant and surfactant, sodium dodecylbenzenesulfonate (SDBS). Contact angle measurement tests revealed the effect of SDBS addition on the distribution of TiO2 NPs on the HA surface: a decrease in the contact angle and, thus, an increase in the wetting ability of the HA/TiO2 composite were observed. The combination of annealing and SDBS addition treatments allowed for guest TiO2 particles to be uniformly distributed on the surface of the host HA particles, showing a rapid conversion from a hydrophobic to superhydrophilic property. In vitro investigation suggested that the cell viabilities of annealed HA/TiO2, SDBS-added HA/TiO2, and SDBS-added and annealed HA/TiO2 reached 89.7%, 94.7%, and 95.8%, respectively, while those of HA and untreated HA/TiO2 were 80.3% and 86.9%, respectively. The modified composites exhibited lower cytotoxicities than the unmodified systems (HA and HA/TiO2). Furthermore, the cell adhesion behavior of the composites was confirmed through actin-4′,6-Diamidino-2-phenylindole (DAPI) staining, which showed negligible changes in the cytoskeleton architecture of the cells. This study confirmed that a modified HA/TiO2 composite has potential for bioapplications.