We have evaluated the resistance to displacement of six stable methods of fixation of a sagittal split ramus osteotomy (SSRO) in the mandibular advancement with counterclockwise rotation. We tested 60 synthetic hemimandibles in six groups of 10 each: Group I - fixation with a straight four-hole 2.0mm miniplate; Group II - a straight six-hole 2.0mm miniplate; Group III - two straight 2.0mm four-hole miniplates; Group IV - an eight-hole 2.0mm (grid plate); Group V - a 2.0mm four-hole straight miniplate and 2.0×12mm bicortical screw; and Group VI - a straight four-hole 2.0mm locking miniplate. We applied a linear force in the region between the canine and the first premolar using a universal testing machine (EMIC- DL2000) with a loading cell of 10 KN. The loads at 1, 3, and 5mm displacement were recorded (N) and the data transmitted from the load cell to a computer. Results were analysed using analysis of variance (ANOVA) (p<0.001) and the Tukey post-test for comparison of the significance of the differences between the groups. For the three degrees of displacement, fixation with two straight 2.0mm plates and with the grid plate gave higher load values.

This study aimed to assess the potential effects of two different osteotomy designs of the maxillary lateral wall on dental and skeletal changes after surgically assisted rapid maxillary expansion (SARME). Thirty adult patients were divided into two groups according to the lateral osteotomy design: group 1 (n=16) underwent lateral osteotomy performed in a horizontal straight fashion, and group 2 (n=14) underwent lateral osteotomy performed in parallel to the occlusal plane with a step at the zygomatic buttress. Cone beam computed tomography scans were obtained preoperatively (T1), immediately after expansion (T2), and 6 months after expansion (T3). Mixed analysis of variance (ANOVA) was used for the statistical analysis. The results showed no significant interaction effect between groups and time points. Therefore, maxillary expansion was effective in both groups. Statistically significant increases in all dental and skeletal measurements were observed immediately after expansion (P<0.001). Relapse of the nasal floor width, tipping of the supporting teeth, and an increase in root distance in molars occurred at T3 (P<0.05). In summary, the maxillary lateral osteotomy design did not influence the results of SARME, which occurred mainly through the inclination of maxillary segments.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract