Cyclic organic carbonates represent a relevant class of chemicals that can be prepared from CO 2 by cycloaddition to epoxides. The application of efficient catalysts is crucial in allowing the cycloaddition reaction to proceed under very mild conditions of temperature, pressure, and CO 2 concentration, thus resulting in a sustainable and carbonbalanced approach to CO 2 conversion. This is particularly the case if impure waste CO 2 could be employed as a feedstock. In this Review, we have critically analyzed the burgeoning literature on the cycloaddition of CO 2 to epoxides with the aim to provide state-of-the-art knowledge on the catalysts that can convert CO 2 to carbonates under ambient conditions. These have been systematically organized in families of compounds and critically scrutinized in terms of catalytic activity, availability and mechanistic features. Finally, we provide an overview on the catalytic systems able to function using diluted and impure CO 2 as a feedstock.
Metal-organic frameworks (MOFs) are a promising class of porous materials because it is possible to mutually control their porous structure, composition and functionality. However, it is still a challenge to predict the network topology of such framework materials prior to their synthesis. Here we use a new rare earth (RE) nonanuclear carboxylate-based cluster as an 18-connected molecular building block to form a gea-MOF (gea-MOF-1) based on a (3,18)-connected net. We then utilized this gea net as a blueprint to design and assemble another MOF (gea-MOF-2). In gea-MOF-2, the 18-connected RE clusters are replaced by metal-organic polyhedra, peripherally functionalized so as to have the same connectivity as the RE clusters. These metal-organic polyhedra act as supermolecular building blocks when they form gea-MOF-2. The discovery of a (3,18)-connected MOF followed by deliberate transposition of its topology to a predesigned second MOF with a different chemical system validates the prospective rational design of MOFs.
Single atom catalysis (SAC) is a recent discipline of heterogeneous catalysis for which a single atom on a surface is able to carry out various catalytic reactions. A kind of revolution in heterogeneous catalysis by metals for which it was assumed that specific sites or defects of a nanoparticle were necessary to activate substrates in catalytic reactions. In another extreme of the spectrum, surface organometallic chemistry (SOMC), and, by extension, surface organometallic catalysis (SOMCat), have demonstrated that single atoms on a surface, but this time with specific ligands, could lead to a more predictive approach in heterogeneous catalysis. The predictive character of SOMCat was just the result of intuitive mechanisms derived from the elementary steps of molecular chemistry. This review article will compare the aspects of single atom catalysis and surface organometallic catalysis by considering several specific catalytic reactions, some of which exist for both fields, whereas others might see mutual overlap in the future. After a definition of both domains, a detailed approach of the methods, mostly modeling and spectroscopy, will be followed by a detailed analysis of catalytic reactions: hydrogenation, dehydrogenation, hydrogenolysis, oxidative dehydrogenation, alkane and cycloalkane metathesis, methane activation, metathetic oxidation, CO 2 activation to cyclic carbonates, imine metathesis, and selective catalytic reduction (SCR) reactions. A prospective resulting from present knowledge is showing the emergence of a new discipline from the overlap between the two areas.
Surface organometallic chemistry has been reviewed with a special focus on environmentally relevant transformations (C–H activation, CO2 conversion, oxidation).
Given the large amount of anthropogenic CO2 emissions, it is advantageous to use CO2 as feedstock for the fabrication of everyday products, such as fuels and materials. An attractive way to use CO2 in the synthesis of polymers is by the formation of five‐membered cyclic organic carbonate monomers (5CCs). The sustainability of this synthetic approach is increased by using scaffolds prepared from renewable resources. Indeed, recent years have seen the rise of various types of carbonate syntheses and applications. 5CC monomers are often polymerized with diamines to yield polyhydroxyurethanes (PHU). Foams are developed from this type of polymers; moreover, the additional hydroxyl groups in PHU, absent in classical polyurethanes, lead to coatings with excellent adhesive properties. Furthermore, carbonate groups in polymers offer the possibility of post‐functionalization, such as curing reactions under mild conditions. Finally, the polarity of carbonate groups is remarkably high, so polymers with carbonates side‐chains can be used as polymer electrolytes in batteries or as conductive membranes. The target of this Review is to highlight the multiple opportunities offered by polymers prepared from and/or containing 5CCs. Firstly, the preparation of several classes of 5CCs is discussed with special focus on the sustainability of the synthetic routes. Thereafter, specific classes of polymers are discussed for which the use and/or presence of carbonate moieties is crucial to impart the targeted properties (foams, adhesives, polymers for energy applications, and other functional materials).
Readily available ascorbic acid was discovered as an environmentally benign hydrogen bond donor (HBD) for the synthesis of cyclic organic carbonates from CO2 and epoxides in the presence of nucleophilic co-catalysts. The ascorbic acid/TBAI (TBAI: tetrabutylammonium iodide) binary system could be applied for the cycloaddition of CO2 to various epoxides under ambient or mild conditions. DFT calculations and catalysis experiments revealed an intriguing bifunctional mechanism in the step of CO2 insertion involving different hydroxyl moieties (enediol, ethyldiol) of the ascorbic acid scaffold.
Recent discoveries highlighted the activity and the intriguing mechanistic features of NbCl5 as a molecular catalyst for the cycloaddition of CO2 and epoxides under ambient conditions. This has inspired the preparation of novel silica-supported Nb species by reacting a molecular niobium precursor, [NbCl5·OEt2], with silica dehydroxylated at 700 °C (SiO(2-700)) or at 200 °C (SiO(2-200)) to generate diverse surface complexes. The product of the reaction between SiO(2-700) and [NbCl5·OEt2] was identified as a monopodal supported surface species, [≡SiONbCl4·OEt2] (1a). The reactions of SiO(2-200) with the niobium precursor, according to two different protocols, generated surface complexes 2a and 3a, presenting significant, but different, populations of the monopodal surface complex along with bipodal [(≡SiO)2NbCl3·OEt2]. (93)Nb solid-state NMR spectra of 1a-3a and (31)P solid-state NMR on their PMe3 derivatives 1b-3b led to the unambiguous assignment of 1a as a single-site monopodal Nb species, while 2a and 3a were found to present two distinct surface-supported components, with 2a being mostly monopodal [≡SiONbCl4·OEt2] and 3a being mostly bipodal [(≡SiO)2NbCl3·OEt2]. A double-quantum/single-quantum (31)P NMR correlation experiment carried out on 2b supported the existence of vicinal Nb centers on the silica surface for this species. 1a-3a were active heterogeneous catalysts for the synthesis of propylene carbonate from CO2 and propylene oxide under mild catalytic conditions; the performance of 2a was found to significantly surpass that of 1a and 3a. With the support of a systematic DFT study carried out on model silica surfaces, the observed differences in catalytic efficiency were correlated with an unprecedented cooperative effect between two neighboring Nb centers on the surface of 2a. This is in an excellent agreement with our previous discoveries regarding the mechanism of NbCl5-catalyzed cycloaddition in the homogeneous phase.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.