Water pollution from dyes is harmful to the environment, plants, animals, and humans and is one of the most widespread problems afflicting people throughout the world. Adsorption is a widely used method to remove contaminants derived from the textile industry, food colorants, printing, and cosmetic manufacturing from water. Here, aiming to develop new low-cost and up-scalable adsorbent materials for anionic dye remediation and water decontamination by electrostatic interactions, two cationic resins (R1 and R2) were prepared. In particular, they were obtained by copolymerizing 4-ammonium methyl and ethyl styrene monomers (M1 and M2) with dimethylacrylamide (DMAA), using N-(2-acryloylamino-ethyl)-acrylamide (AAEA) as cross-linker. Once characterized by several analytical techniques, upon their dispersion in an excess of water, R1 and R2 provided the R1- and R2-based hydrogels (namely R1HG and R2HG) with equilibrium degrees of swelling (EDS) of 900% and 1000% and equilibrium water contents (EWC) of 90 and 91%, respectively. By applying Cross’ rheology equation to the data of R1HG and R2HG’s viscosity vs. shear rate, it was established that both hydrogels are shear thinning fluids with pseudoplastic/Bingham plastic behavior depending on share rate. The equivalents of -NH3+ groups, essential for the electrostatic-based absorbent activity, were estimated by the method of Gaur and Gupta on R1 and R2 and by potentiometric titrations on R1HG and R2HG. In absorption experiments in bulk, R1HG and R2HG showed high removal efficiency (97–100%) towards methyl orange (MO) azo dye, fluorescein (F), and their mixture (MOF). Using F or MO solutions (pH = 7.5, room temperature), the maximum absorption was 47.8 mg/g in 90′ (F) and 47.7 mg/g in 120′ (MO) for R1, while that of R2 was 49.0 mg/g in 20′ (F) and 48.5 mg/g in 30′ (MO). Additionally, R1HG and R2HG-based columns, mimicking decontamination systems by filtration, were capable of removing MO, F, and MOF from water with a 100% removal efficiency, in different conditions of use. R1HG and R2HG represent low-cost and up-scalable column packing materials that are promising for application in industrial wastewater treatment.

Nitrites are metastable anions that are derived from the oxidation of ammonia by agricultural pollution, sewage, decaying protein, and other nitrogen sources. They are a recognized environmental issue due to their role in eutrophication, as well as in surface and groundwater contamination, being toxic to almost all living creatures. Recently, we reported on the high efficiency of two cationic resins (R1 and R2) forming hydrogels (R1HG and R2HG) by dispersion in water in removing anionic dyes from water by electrostatic binding. Here, aiming at developing adsorbent materials for nitrite remediation, R1, R2, R1HG, and R2HG were first tested in adsorption experiments in batches monitored by UV–Vis methods, using the Griess reagent system (GRS) in order to assess their removal efficiency by contact over time. Particularly, samples of water appositely contaminated with nitrites were analyzed by UV–Vis before and during treatment with the hydrogels. The initial concentration of nitrites was quantified (118 mg/L). Then, the removal of nitrites over time, the removal efficiency of R1HG (89.2%) and of R2HG (89.6%), their maximum adsorption (21.0 mg/g and 23.5 mg/g), as well as the adsorption kinetics and mechanisms were evaluated. Additionally, R1HG- and R2HG-based columns (h = 8–10 cm, ØE = 2 cm) mimicking mini-scale decontamination systems by filtration were used to rapidly filter samples of water polluted with nitrite that were under pressure. R1HG and R2GH were capable of totally removing nitrites (99.5% and 100%) from volumes of nitrite solutions that were 118 mg/L that is 10 times the volumes of resins used. Additionally, when extending filtration to increasing volumes of the same nitrite solution up to 60 times the volume of resins used, the removal efficiently of R1HG decreased, and that of R2HG remained stable at over 89%. Interestingly, both the worn-out hydrogels were regenerable by 1% HCl washing, without a significant reduction in their original efficiency. There is a lack of studies in the literature reporting on novel methods to remove nitrite from water. R1HG and especially R2HG represent low-cost, up-scalable, and regenerable column-packing materials with promise for applications in the treatment of drinking water contaminated by nitrites.

In this work, quantum chemical calculations based on density functional theory (DFT) were performed to predict the antioxidant potential of four bioactive gut microbiota metabolites of the natural polyphenols ellagitannins (ETs) and ellagic acid (EA), also known as urolithins (UROs). In order to evaluate their ability to counter the effect of oxidative stress caused by reactive oxygen species (ROS), such as the hydroperoxyl radical (•OOH), different reaction mechanisms were investigated, considering water and lipid-like environments. Through our in silico results, it emerged that at physiological pH, the scavenging activity of all urolithins, except urolithin B, are higher than that of trolox and other potent antioxidants existing in nature, such as EA, α-mangostin, allicin, caffeine and melatonin. These findings were confirmed by experimental assays.

Anxiety and anxiety-related disorders are becoming more evident every day, affecting an increasing number of people around the world. Metabolic disorders are often associated with anxiety. Furthermore, anxiety branches into metabolic disorders by playing multiple roles as a cofactor, symptom, and comorbidity. Taken together, these considerations open the possibility of integrating the therapy of metabolic disorders with specific drugs for anxiety control. However, anxiolytic compounds often cause disabling effects in patients. The main goal could be to combine therapeutic protocols with compounds capable of reducing side effects while performing multiple beneficial effects. In this article we propose a group of bioactive ingredients called botanicals as a healthy supplement for the treatment of metabolic disorders related to anxiety.

Basil-based semi-finished products, which are mainly used as an intermediate to produce the typical pesto sauce, are prepared and exported all over the world. Color is a fundamental organoleptic requirement for the acceptability of these semi-finished products by the manufacturers of the pesto sauce. Some alternative formulations, which adjust the typical industrial recipe by both changing the preservative agent (ascorbic acid, citric acid, or a mixture of both) and introducing a preliminary thermic treatment (blast chilling), were evaluated. In this work, a fast and non-destructive spectrophotometric analysis, to monitor the color variations in these food products during their shelf-life, was proposed. The raw diffuse reflectance spectra (380–900 nm) obtained by a UV–visible spectrophotometer, endowed with an integrating sphere, together with the CIELab parameters (L*, a*, b*) automatically obtained from these, were considered, and elaborated using multivariate statistical analysis (principal component analysis). From this preliminary study, blast chilling, together with the use of ascorbic acid, proved to be the best solution to better preserve the color of these products during their shelf-life.

The aim of this study was to reduce and refine the number of animals subjected to behavioral analysis by ToxTrac software during the European project Interreg-ALCOTRA “Finnover”.