No abstract

No abstract

Silicon carbide (SiC) samples have been joined by a pressureless slurry based method. The CaO-Al 2 O 3 (CA) glass-ceramic joining material has been characterized in term of crystalline phases and thermal and mechanical properties. A torsion test based on miniaturized hourglass shaped specimens has been used as pure shear strength test method for joined ceramic samples. Torsion results are compared to those obtained by a single lap offset (SLO) test in compression on the same joined materials. Pure shear strength of 104 ± 25 MPa has been measured by torsion test, whereas single lap offset gave 36 ± 8 MPa.*monica.ferraris@polito.it

No abstract

The results of an experimental investigation on epoxy-joined silicon carbide tested in shear mode by four different configurations of torsion test are presented and compared to results obtained by asymmetric four-point bending and four different lap tests in compression. All samples have been joined by an epoxy adhesive (Araldite AV119) which is to be considered as a model brittle joining material chosen to obtain several joined samples in a reasonable time. Advantages and disadvantages of each configuration are discussed and compared to results previously obtained with epoxy-joined Carbon/Carbon composites and ceramics tested with the same methods. *monica.ferraris@polito.it