We report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a specially designed asymmetrically shocked gas jet. The reproducibility of the electron source was also assessed over a period of a week and found to be satisfactory with similar values of the beam charge and energy. Particle in cell simulations confirm the role of the shock and the density transition in the electron injection mechanism. These results show that the reproducibility and stability of the laser-plasma accelerator are greatly enhanced on the long-term scale when using a robust scheme for density gradient injection.

The evidence of multi-photon absorption enhancement by the dual-wavelength double-pulse laser irradiation in transparent sapphire was demonstrated experimentally and explained theoretically for the first time. Two collinearly combined laser beams with the wavelengths of 1064 nm and 355 nm, inter-pulse delay of 0.1 ns, and pulse duration of 10 ps were used to induce intra-volume modifications in sapphire. The theoretical prediction of using a particular orientation angle of 15 degrees of the half-wave plate for the most efficient absorption of laser irradiation is in good agreement with the experimental data. The new innovative effect of multi-photon absorption enhancement by dual-wavelength double-pulse irradiation allowed utilisation of the laser energy up to four times more efficiently for initiation of internal modifications in sapphire. The new absorption enhancement effect has been used for efficient intra-volume dicing and singulation of transparent sapphire wafers. The dicing speed of 150 mm/s was achieved for the 430 μm thick sapphire wafer by using the laser power of 6.8 W at the repetition rate of 100 kHz. This method opens new opportunities for the manufacturers of the GaN-based light-emitting diodes by fast and precise separation of sapphire substrates.

No abstract

Understanding of material behaviour at nanoscale under intense laser excitation is becoming critical for future application of nanotechnologies. Nanograting formation by linearly polarised ultra-short laser pulses has been studied systematically in fused silica for various pulse energies at 3D laser printing/writing conditions, typically used for the industrial fabrication of optical elements. The period of the nanogratings revealed a dependence on the orientation of the scanning direction. A tilt of the nanograting wave vector at a fixed laser polarisation was also observed. The mechanism responsible for this peculiar dependency of several features of the nanogratings on the writing direction is qualitatively explained by considering the heat transport flux in the presence of a linearly polarised electric field, rather than by temporal and spatial chirp of the laser beam. The confirmed vectorial nature of the light-matter interaction opens new control of material processing with nanoscale precision.

Laser–plasma acceleration at kilohertz repetition rates has recently been shown to work in two different regimes with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two laser–plasma accelerator (LPA) processes can be distinguished, where beams of the highest quality, with a charge of 5.4 pC and a spectrum peaked at 2–2.5 MeV, are obtained with short pulses propagating at moderate plasma densities. Through particle-in-cell (PIC) simulations, the two different acceleration processes are thoroughly explained. Finally, we proceed to show the results of a 5-h continuous and stable run of our LPA accelerator accumulating more than 18×106 consecutive shots, with a charge of 2.6 pC and a peaked 2.5 MeV spectrum. A parametric study of the influence of the laser driver energy through PIC simulations underlines that this unprecedented stability was obtained thanks to micro-scale density gradient injection. Together, these results represent an important step toward stable laser–plasma accelerated electron beams at kilohertz repetition rates.