Recently, the treatment of effluent by agricultural waste biomass has significantly attracted wide interest among researchers due to its availability, efficacy, and low cost. The removal of toxic Remazol Brilliant Blue-R (RBBR) from aqueous solutions using HNO3-treated Juglans nigra (walnut) shell biomass carbon as an adsorbent has been examined under various experimental conditions, such as initial pH, adsorbate concentration, adsorbent dosage, particle size, agitation speed, and type of electrolyte. The experiments are designed to achieve the maximum dye removal efficiency using the response surface methodology (RSM). The optimum pH, adsorbent dosage, and particle size were found to be 1.5, 7 g L−1, and 64 μm, respectively for maximum decolorization efficiency (98.24%). The prepared adsorbent was characterized by particle size, Brunauer–Emmett–Teller (BET) surface area, pore volume, zero-point charge (pHzpc), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FE-SEM/EDX), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Based on fitting the experimental data with various models, the isotherm and kinetic mechanism are found to be more appropriate with Langmuir isotherm and pseudo-second-order kinetics. The adsorption mechanism can be described by the intra-particle diffusion model, Bangham, and Boyd plots. The overall rate of adsorption is controlled by the external film diffusion of dye molecules. The maximum monolayer adsorption capacity, (qmax) 54.38 mg g−1 for RBBR dye, was obtained at a temperature of 301 K. From a thermodynamic standpoint, the process is endothermic, spontaneous, and the chemisorption process is favored at high temperatures. Desorption studies were conducted with various desorbing reagents in various runs and the maximum desorption efficiency (61.78% in the third run) was obtained using the solvent methanol. Reusability studies demonstrated that the prepared adsorbent was effective for up to three runs of operation. The investigation outcomes concluded that walnut shell biomass activated carbon (WSBAC) is a cost-effective, eco-friendly, and bio-sustainable material that can be used for synthetic dye decolorization in aqueous media.

The adsorption of Congo red (CR), an azo dye, from aqueous solution using free and immobilized agricultural waste biomass of Nelumbo nucifera (lotus) has been studied separately in a continuous fixed-bed column operation. The N. nucifera leaf powder adsorbent was immobilized in various polymeric matrices and the maximum decolorization efficiency (83.64%) of CR occurred using the polymeric matrix sodium silicate. The maximum efficacy (72.87%) of CR dye desorption was obtained using the solvent methanol. Reusability studies of free and immobilized adsorbents for the decolorization of CR dye were carried out separately in three runs in continuous mode. The % color removal and equilibrium dye uptake of the regenerated free and immobilized adsorbents decreased significantly after the first cycle. The decolorization efficiencies of CR dye adsorption were 53.66% and 43.33%; equilibrium dye uptakes were 1.179 mg g–1 and 0.783 mg g–1 in the third run of operation with free and immobilized adsorbent, respectively. The column experimental data fit very well to the Thomas and Yoon–Nelson models for the free and immobilized adsorbent with coefficients of correlation R2 ≥ 0.976 in various runs. The study concludes that free and immobilized N. nucifera can be efficiently used for the removal of CR from synthetic and industrial wastewater in a continuous flow mode. It makes a substantial contribution to the development of new biomass materials for monitoring and remediation of toxic dye-contaminated water resources.

The removal of color from dye wastewater is crucial, since dyes are extremely toxic and can cause cancer in a variety of life forms. Studies must be done to use cost-effective adsorbents for the removal of color from dye effluents to protect the environment. To our knowledge, virtually no research has been done to describe the possibility of using Calotropis gigantea leaf extract zinc hydroxide nanoparticles (CG-Zn(OH)2NPs) as an adsorbent for the decolorization of Coomassie violet (CV) from the aqueous emulsion, either in batch mode or continuously. In the present batch investigation, CV dye is removed from the synthetic aqueous phase using CG-Zn(OH)2NPs as an adsorbent. The synthesized nanoparticles were characterized using various instrumental techniques such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS) and Brunauer–Emmett–Teller (BET) surface area and pore volume, a particle size analyser, and zero-point charge. The decolorization efficacy of CV dye from an aqueous phase by the adsorbent was examined in batch mode by varying process parameters. The consequences of various experimental variables were optimized using response surface methodology (RSM) to achieve the maximum decolorization efficiency (90.74%) and equilibrium dye uptake, qe (35.12 mg g−1). The optimum pH, dye concentration, CG-Zn(OH)2NPs adsorbent dosage, and particle size were found to be 1.8, 225 mg L−1, 5 g L−1, and 78 μm, respectively for CV dye adsorption capacity at equilibrium. The adsorbent zero-point charge was found to be at pH 8.5. The Langmuir isotherm model provided a good representation of the equilibrium data in aqueous solutions, with a maximum monolayer adsorption capability (qmax) of 40.25 mg g−1 at 299 K. The dye adsorption rate follows a pseudo-second-order kinetic model at various dye concentrations, which indicated that the reaction is more chemisorption than physisorption. The negative values of ΔG and positive values of ΔH at different temperatures indicate that the adsorption process is spontaneous and endothermic, respectively. Reusability tests revealed that the prepared nanoparticles may be used for up to three runs, indicating that the novel CG-Zn(OH)2NPs seems to be a very promising adsorbent for the removal of Coomassie violet dye from wastewater.

No abstract