In this study, the effect of naturally available and low-cost kaoline particles on the microstructural and mechanical behaviour of Al-SiC-Kaoline Hybrid metal matrix composite was investigated. Al-10% SiC-x% Kaoline (X =0, 2, 4, 6, 8) composite samples were fabricated through powder metallurgy technique by applying a compaction pressure of 350 MPa. The fabricated composite samples were subjected to Density, Hardness, tensile and impact tests to study the mechanical behaviour of fabricated hybrid composite. The presence of SiC and Kaoline reinforcements was confirmed by using SEM and X-Ray Diffraction analysis. It was observed that the maximum ultimate tensile strength (U.T.S) and maximum Yield Strength (Y.S) of the hybrid composite were found to be 263 MPa and 202 MPa for Al-10%SiC-4%kaoline reinforcement. The formation of the intermetallic compound such as Al 2 Cu was observed in XRD and SEM analysis for Al-10% SiC-6 % kaoline and Al-10% SiC-8% of kaoline reinforcement which leads to decrease in the U.T.S and Y.S of fabricated specimens. The impact strength of Al-10%SiC-8% kaoline found to be decreased by 44.4% compared to unreinforced Aluminium due to the presence of harder SiC and Kaoline reinforcements particles. To study the fracture mechanism, Scanning Electron Microscopy study was carried on the fractured Tensile specimens which reveal that ductile fracture in unreinforced Al, Al-10% SiC, Al-10% SiC-2% Kaoline due to the formation of dimples and Brittle fracture was observed in Al-10% SiC-4% Kaoline, Al-10% SiC-6% Kaoline and Al-10% SiC-8% Kaoline due to the existence of cleavages and microcracks.

Hybrid metal matrix composites with naturally available and low-cost reinforcements made tremendous demand in the automobile industry to fabricate parts like Pistons, Automobile body and brake discs because of the superior properties of HMMC compared to monolithic Aluminium. Present work focusses on the fabrication of Al-10% SiC-4% Kaoline HMMC by using conventional sintering, Microwave sintering and Spark Plasma Sintering (SPS) techniques. To reveal the phase identi cation and the distribution of reinforcements, Fabricated composites were investigated by using XRD, SEM integrated with an EDS analyser. Tensile, Compression and hardness tests were performed as per ASTM standards to study the effect of sintering mechanisms on the fabricated HMMC specimens. Results reveal that an enhancement of 13.3 % in U.T.S and 11.7 % Compression strength was observed in the Spark Plasma Sintered HMMC when compared to conventional sintered composite specimens because of lesser sintering temperature, time and the absence of intermetallic compounds in the Spark Plasma Sintering process. The formation of the Al 2 Cu intermetallic compound was identi ed in the XRD pattern of conventionally sintered Al-10% SiC-4% Kaoline HMMC sample due to the high sintering time and temperature which leads to inadequate mechanical properties. The fractured surface of tensile specimens reveals the presence of cleavages on the conventionally sintered HMMC which conforms the brittle fracture, and the existence of dimples on the Microwave sintered and Spark Plasma Sintered samples which signify that the ductile mode of failure in HMMC samples. Out of the three sintering techniques, Spark Plasma Sintering exhibits superior mechanical properties and lesser porosity levels.

Purpose During the COVID-19 pandemic, the three-dimensional (3D) printing community is actively participating to address the supply chain gap of essential medical supplies such as face masks, face shields, door adapters, test swabs and ventilator valves. This paper aims to present a comprehensive study on the role of 3D printing during the coronavirus (COVID-19) pandemic, its safety and its challenges. Design/methodology/approach This review paper focuses on the applications of 3D printing in the fight against COVID-19 along with the safety and challenges associated with 3D printing to fight COVID-19. The literature presented in this paper is collected from the journal indexing engines including Scopus, Google Scholar, ResearchGate, PubMed, Web of Science, etc. The main keywords used for searches were 3D printing COVID-19, Safety of 3D printed parts, Sustainability of 3D printing, etc. Further possible iterations of the keywords were used to collect the literature. Findings The applications of 3D printing in the fight against COVID-19 are 3D printed face masks, shields, ventilator valves, test swabs, drug deliveries and hands-free door adapters. As most of these measures are implemented hastily, the safety and reliability of these parts often lacked approval. The safety concerns include the safety of the printed parts, operators and secondary personnel such as the workers in material preparation and transportation. The future challenges include sustainability of the process, long term supply chain, intellectual property and royalty-free models, etc. Originality/value This paper presents a comprehensive study on the applications of 3D printing in the fight against COVID-19 with emphasis on the safety and challenges in it.

No abstract

No abstract

No abstract

No abstract

No abstract