No abstract

The paper describes two different approaches to ultrasonic measurements of temperature in aqueous solutions. The first approach uses two narrowband ultrasonic transducers and support electronics that form an oscillating sensor which output frequency is related to the measured temperature. This low-cost sensor demonstrated sensitivity of about 40 Hz/K at the distance of 190 mm and the operating frequency of about 25 kHz. The second approach utilised pulse-echo mode at the centre frequency of 20 MHz. The reflector featured a cavity that was filled with deionised water. The ultrasound propagation delay in the cavity was related to the temperature in the solution. The experiments were conducted for deionised water, and solutions of sodium persulfate, sodium chloride, and acetic acid with concentrations up to 0.5 M. In the experiments (conducted within the temperature range from 15 to 30• C), we observed increases in the ultrasound velocity for increased temperatures and concentrations as was expected. Measurement results were compared with literature data for pure and seawater. It was concluded that ultrasonic measurements of temperature were conducted with the resolution well below 0.1 K for both methods. Advantages of ultrasonic temperature measurements over conventional thermometers were discussed.

Polymeric tissue scaffolds are central to many regenerative medicine therapies offering a new approach to medicine. As the number of these regenerative therapies increases there is a pressing need for an improved understanding of the methods of scaffold fabrication. Of the many approaches to processing scaffolds, supercritical fluid fabrication methods have a distinct advantage over other techniques as they do not require the use of organic solvents, elevated processing temperatures or leaching processes. The work presented here is centred on the development of a new approach to monitoring supercritical scaffold fabrication based on determination of the scaffold acoustic impedance to inform protocols for scaffold fabrication. The approach taken uses an ultrasonic pulse-echo reflectometer enabling non-invasive monitoring of the supercritical environment on-line. The feasibility of this approach was investigated for two scaffolds of different molecular weight. Acoustic results demonstrate that differences in the physical properties of the two scaffolds could be resolved, particularly during the foaming process which correlated with findings from time-lapsed imaging and micro X-ray computed tomography (micro X-ray CT) images. Thus, this work demonstrates the feasibility of ultrasonic pulse-echo reflectometry to non-invasively study supercritical scaffold fabrication on-line providing a greater understanding of the scaffold fabrication process.

No abstract

A pseudo-random code/correlation-based ultrasonic spectrometer can detect signals whose amplitudes are significantly less than both the input noise floor and the voltage increment equivalent to the least significant bit of the analogue to digital converter. The phenomenon is explained on the basis of classical information theory, which also provides the basis for the design of such systems. An overall noise model is developed, and experimental results are presented that demonstrate its validity.