Significant research efforts have been dedicated to the integration of biological species with electronic elements to yield smart bioelectronic devices. The integration of DNA, proteins, and whole living cells and tissues with electronic devices has been developed into numerous intriguing applications. In particular, the quantitative detection of biological species and monitoring of biological processes are both critical to numerous areas of medical and life sciences. Nevertheless, most current approaches merely focus on the "monitoring" of chemical processes taking place on the sensing surfaces, and little efforts have been invested in the conception of sensitive devices that can simultaneously "control" and "monitor" chemical and biological reactions by the application of on-surface reversible stimuli. Here, we demonstrate the light-controlled fine modulation of surface pH by the use of photoactive molecularly modified nanomaterials. Through the use of nanowire-based FET devices, we showed the capability of modulating the on-surface pH, by intensity-controlled light stimulus. This allowed us simultaneously and locally to control and monitor pH-sensitive biological reactions on the nanodevices surfaces, such as the local activation and inhibition of proteolytic enzymatic processes, as well as dissociation of antigen-antibody binding interactions. The demonstrated capability of locally modulating the on-surface effective pH, by a light stimuli, may be further applied in the local control of on-surface DNA hybridization/dehybridization processes, activation or inhibition of living cells processes, local switching of cellular function, local photoactivation of neuronal networks with single cell resolution and so forth.

Quantitative detection of biological and chemical species is critical to numerous areas of medical and life sciences. In this context, information regarding pH is of central importance in multiple areas, from chemical analysis, through biomedical basic studies and medicine, to industry. Therefore, a continuous interest exists in developing new, rapid, miniature, biocompatible and highly sensitive pH sensors for minute fluid volumes. Here, we present a new paradigm in the development of optoelectrical sensing nanodevices with built-in self-calibrating capabilities. The proposed electrical devices, modified with a photoactive switchable molecular recognition layer, can be optically switched between two chemically different states, each having different chemical binding constants and as a consequence affecting the device surface potential at different extents, thus allowing the ratiometric internal calibration of the sensing event. At each point in time, the ratio of the electrical signals measured in the ground and excited states, respectively, allows for the absolute concentration measurement of the molecular species under interest, without the need for electrical calibration of individual devices. Furthermore, we applied these devices for the real-time monitoring of cellular metabolic activity, extra- and intracellularly, as a potential future tool for the performance of basic cell biology studies and high-throughput personalized medicine-oriented research, involving single cells and tissues. This new concept can be readily expanded to the sensing of additional chemical and biological species by the use of additional photoactive switchable receptors. Moreover, this newly demonstrated coupling between surface-confined photoactive molecular species and nanosensing devices could be utilized in the near future in the development of devices of higher complexity for both the simultaneous control and monitoring of chemical and biological processes with nanoscale resolution control.

Although biosensors based on nanowires-field effect transistor were proved extraordinarily efficient in fundamental applications, screening of charges due to the high-ionic strength of most physiological solutions imposes severe limitations in the design of smart, “real-time” sensors, as the biosample solution has to be previously desalted. This work describes the development of a novel nanowire biosensor that performs extracellular real-time multiplex sensing of small molecular metabolites, the true indicators of the body’s chemistry machinery, without any preprocessing of the biosample. Unlike other nanoFET devices that follow direct binding of analytes to their surfaces, our nanodevice acts by sensing the oxidation state of redox-reactive chemical species bound to its surface. The device’s surface array is chemically modified with a reversible redox molecular system that is sensitive to H2O2 down to 100 nM, coupled with a suite of corresponding oxidase enzymes that convert target metabolites to H2O2, enabling the direct prompt analysis of complex biosamples. This modality was successfully demonstrated for the real-time monitoring of cancer cell samples’ metabolic activity and evaluating chemotherapeutic treatment options for cancer. This distinctive system displays ultrasensitive, selective, noninvasive, multiplex, real-time, label-free, and low-cost sensing of small molecular metabolites in ultrasmall volumes of complex biosamples, in the single-microliter scale, placing our technology at the forefront of this cutting-edge field.

The ability to detect traces of highly energetic explosive materials sensitively, selectively, accurately, and rapidly could be of enormous benefit to civilian national security, military applications, and environmental monitoring. Unfortunately, the detection of explosives still poses a largely unmet arduous analytical problem, making their detection an issue of burning immediacy and a massive current challenge in terms of research and development. Although numerous explosive detection approaches have been developed, these methods are usually time-consuming, require bulky equipment, tedious sample preparation, a trained operator, cannot be miniaturized, and lack the ability to perform automated real-time high-throughput analysis, strongly handicapping their mass deployment. Here, we present the first demonstration of the “direct” electrochemical approach for the sensitive, selective, and rapid vapor trace detection of TATP and HMTD, under ambient conditions, unaffected by the presence of oxygen and hydrogen peroxide species, down to concentrations lower than 10 ppb. The method is based on the use of Ag-nanoparticles-decorated carbon microfibers air-collecting electrodes (μCF), which allow for the selective direct detection of the organic peroxide explosives, through opening multiple redox routes, not existent in the undecorated carbon electrodes. Finally, we demonstrate the direct and rapid detection of TATP and HMTD explosive species from real-world air samples.

Reaction of diphenylselenium dimethylate, obtained in situ from diphenylselenium dichloride (I), with the amides (II) produces the selenilimines (III).