No abstract

No abstract

High-strength, precipitation-hardening AA7075 alloy is used extensively in aircraft primary structures. The friction-stir-welding (FSW) process is an emerging solid-state joining process in which the material that is being welded does not melt and recast. The FSW process and tool parameters play a major role in deciding the joint strength. In this paper an attempt has been made to establish an empirical relationship between the FSW process and tool parameters (tool rotational speed, welding speed, axial force, shoulder diameter, pin diameter, and tool material hardness) and the tensile strength of the joint. Statistical tools such as design of experiments, analysis of variance, and regression analysis are used to develop the relationships. The developed empirical relationship can be effectively used to predict the tensile strength of FSW joints at the 95 per cent confidence level. A sensitivity analysis is also carried out and compared with the relative impact of input parameters on tensile strength in order to verify the measurement errors on the values of the uncertainty in estimated parameters.

No abstract

High weed infestation is a major constraint to widespread adoption of direct seeding of rice (Oryza sativa L.) The experiments were conducted in 1998 wet and 1999 dry seasons in the Philippines to examine the effects of seeding methods and rates on suppressing weeds in direct-seeded lowland rice. Treatments consisted of four seeding methods: conventional and modified broadcast seeding, drill seeding with east-west and north-south row orientations; three seeding rates: 40, 80 and 160 kg seed ha )1 as well as two weed control levels: weed control with herbicide and no weed control. Among the seeding methods drill seeding with east-west row orientation had the lowest rice grain yield loss caused by weeds (38 % in the wet and 20 % in the dry season), whereas the highest losses because of weeds were observed with conventional broadcast seeding (59 % in the wet and 27 % in the dry season). Seeding rate was inversely correlated to weed interference. Severe rice yield reduction (71 %) caused by weeds was found at a seeding rate of 40 kg seed ha )1 in the wet season. Using seeding rates of 80 and 160 kg seed ha )1 , respectively, lowered yield loss to 47 and 26 % in the wet season, 32 and 18 % in the dry season. Therefore suitable method and/or rate of seeding can significantly suppress weeds in direct-seeded lowland rice.

No abstract

No abstract

No abstract