This work experimentally investigates the dynamics of interaction between a propagating vortex ring and density stratified interface of finite thickness. The flow evolution has been quantified using a high speed shadowgraph technique and particle image velocimetry. The spatial and temporal behaviours of the vortex in the near and far field of the interface and the plume structure formed due to buoyancy are investigated systematically by varying the vortex strength (Reynolds number, Re) and the degree of stratification (Atwood number, At). Maximum penetration length (Lpmax) of the vortex ring through the interface is measured over a range of Reynolds (1350 ≤ Re ≤ 4600) and Richardson (0.1 ≤ Ri ≤ 4) numbers. It is found that for low Froude number values, the maximum penetration length varies linearly with the Froude number as in the study of Orlandi et al. [“Vortex rings descending in a stratified fluid,” Phys. Fluids 10, 2819–2827 (1998)]. However, for high Reynolds and Richardson numbers (Ri), anomalous behaviour in maximum penetration is observed. The Lpmax value is used to characterize the vortex-interface interactions into non-penetrative, partially-penetrative, and extensively penetrative regimes. Flow visualization revealed the occurrence of short-wavelength instability of a plume structure, particularly in a partially penetrative regime. Fluid motion exhibits chaotic behaviour in an extensively penetrative regime. Detailed analyses of plume structure propagation are performed by measuring the plume length and plume rise. Appropriate scaling for the plume length and plume rise is derived, which allows universal collapse of the data for different flow conditions. Some information concerning the instability of the plume structure and decay of the vortex ring is obtained using proper orthogonal decomposition.

No abstract

No abstract

The stratification efficiency of single tank thermal energy storage is affected by the internal mixing processes, especially in the thermocline region due to disturbances of different kinds. To study the mixing dynamics at the interface, we have conducted detailed numerical and supporting experimental studies for different Atwood numbers (stratification levels). Numerical experiments were conducted with two successive vortex pairs with three different time-lags (short, medium and long). For the short time-lag case, the preliminary vortex pair merges with the ensuing vortex pair. The merged single vortex pair peels back the thermocline layer causing mixing of the hot and cold fluids. The thermocline thickness increases as a result of the entrainment of the cold fluid into the hot fluid. The peeling process continues until buoyant forces leads to plume like structures that penetrate into the lighter fluid. For the medium and large time-lag cases, such merging of vortices was not observed. The vortex pair interacts separately with the thermocline region. The plume structure created by the first vortex pair interacts with the ensuing vortex pair. The altered interface (thermocline) thickness strongly depends on the nature of the vortex-thermocline interaction mechanisms. The thermocline effectiveness decreases consequent to such interactions and have been quantified in details in the current work.

Molten-salt thermocline-based systems are a low-cost option for single-tank thermal energy storage in concentrated solar power plants. Due to the high variability in solar energy availability, these energy storage devices are subject to transient heat loads during charging that can affect the storage