High-brightness near-infrared broadband amplified spontaneous emission (ASE) was generated by glass-clad Ti:sapphire crystal fibers, which were developed using the co-drawing laser-heated pedestal growth method. As much as 29.2 mW of ASE power was generated using 520 nm laser diodes as the excitation source on an a-cut, 18 μm core-diameter Ti:sapphire crystal fiber (CF). The 3 dB bandwidth was 163.8 nm, and the radiance was 53.94 W·mm(-2) sr(-1). The propagation loss of the glass-clad sapphire CF measured using the cutback method was 0.017 cm(-1) at 780 nm. For single-mode applications, more than 100 μW of power was coupled into a SM600 single-mode fiber.
Efficient glass-clad crystal fiber (CF) lasers were demonstrated using a Ti:sapphire crystalline core as the gain medium. With a core diameter of 18 μm, the laser diode (LD) pump source can be effectively coupled and guided throughout the crystal fiber for a low threshold and high slope efficiency laser operation. The advantage of high heat dissipation efficiency of the fiber structure can be derived from the low core temperature rising measurement (i.e., 17 K/W) with passive cooling. At an output transmittance of 23%, the lowest absorbed threshold of 118.2 mW and highest slope efficiency of 29.6% were achieved, with linear laser polarization.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.