We demonstrate a new refractive index (RI) and salinity sensor based on a lossy mode resonance (LMR) effect which combines fiber-optic side-polishing and radio-frequency (RF) sputtering techniques. The side-polished fiber can enhance optical fibers to generate an evanescent field in sensing applications. Gallium-doped zinc oxide (GZO) thin films produce a high attenuation lossy mode resonance effect that permits a highly sensitive refractive index and salinity fiber sensor. GZO thin film was prepared by an RF magnetron sputtering method. The thickness of the D-shaped fiber sensing device was 74.7 μm, and a GZO film thickness of 67 nm was deposited on the polished surface of the D-shaped fiber to fabricate LMR type liquid salinity sensors. The sensitivity of 3637.8 nm/RIU was achieved in the RI range of 1.333 to 1.392. To investigate the sensitivities of LMR salinity sensors, the NaCl solution salinities of 0%, 50%, 100%, 150%, 200%, and 250% were measured in this work. The experimental result shows that the sensitivity of the salinity sensor is 0.964 nm per salinity unit (SU).
This work presents a high-sensitivity refractive index and salinity sensor by using fiber-optic side-polishing and electron-beam evaporation techniques. Thin film coated on the flat surface of side-polished fibers can generate a lossy mode resonance (LMR) effect. A gallium-doped zinc oxide (GZO) thin film was prepared by an electron-beam evaporation with the ion assisted deposition method. The residual thickness of the side-polished fiber was 76.5 μm, and GZO film thickness of 69 nm was deposited on the flat surface of the side-polished fiber to fabricate LMR-based fiber sensors. The variation in the optical spectrum of LMR-based fiber sensors was measured by different refractive index saline solutions. The LMR wavelength shift is caused by the refractive index change, which is nearly proportional to the salinity. The corresponding sensitivity of the proposed fiber-optic sensor was 3059 nm/RIU (refractive index unit) for the refractive index range of 1.333 to 1.398. To evaluate the sensitivity of LMR salinity sensors, the saline solution salinities of 3.6%, 7.3%, 10.9%, 14.6%, 18.2% and 21.9% were measured in this work. The experimental result shows that the sensitivity of the proposed salinity sensor is 9.94 nm/%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.