Pulsing the potential during the electrochemical CO2 reduction (CO2R) reaction using copper has been shown to influence product selectivity (i.e., to suppress the undesired hydrogen evolution reaction (HER)) and to improve electrocatalyst stability compared to the constant applied potential. However, the underlying mechanism and contribution of interfacial/surface phenomena behind the pulsed potential application remain largely unknown. We investigated the state of the copper surface during the pulsed potential electrochemical CO2R using in situ X-ray adsorption near-edge spectroscopy (XANES). We probed the surface valence of the metallic electrode and found that the Cu electrode remains metallic over a broad pulsed potential range and only oxidizes to form Cu­(OH)2 in the bulk when the pulsed potential reaches the highly oxidative limit (greater than 0.6 V vs reversible hydrogen electrode (RHE)). Our results suggest that the pulsed anodic potential influences the interfacial species on the electrode surface, i.e., the dynamic competition between protons and hydroxide adsorbates instead of bulk copper oxidation. We attribute the suppressed HER to the electroadsorption of hydroxides, which outcompetes protons for surface sites. As shown in a recent in situ infrared study [IijimaG. Iijima, G. ACS Catalysis201996305, adsorbed hydroxides promote CO adsorption, a crucial CO2 reduction intermediate, by preventing CO from becoming inert through a near-neighbor effect. We corroborate this interpretation by demonstrating that the pulsed potential application can suppress the HER during the CO reduction just as the CO2R. Our results suggest that the pulsed potential mechanism favors CO2R over the HER due to two effects: (1) proton desorption/displacement during the anodic potential and (2) the accumulation of OHads creating a higher pH–surface environment, promoting CO adsorption. We can describe this pulsed potential dynamic interfacial mechanism in a competing quaternary Langmuir isotherm model. The insights from this investigation have wide-ranging implications for applying pulsed potential profiles to improve other electrochemical reactions.

Understanding the mechanism and ultimately directing nanocrystal (NC) superlattice assembly and attachment have important implications on future advances in this emerging field. Here, we use 4D-STEM to investigate a monolayer of PbS NCs at various stages of the transformation from a hexatic assembly to a nonconnected square-like superlattice over large fields of view. Maps of nanobeam electron diffraction patterns acquired with an electron microscope pixel array detector (EMPAD) offer unprecedented detail into the 3D crystallographic alignment of the polyhedral NCs. Our analysis reveals that superlattice transformation is dominated by translation of prealigned NCs strongly coupled along the <11n>AL direction and occurs stochastically and gradually throughout single grains. We validate the generality of the proposed mechanism by examining the structure of analogous PbSe NC assemblies using conventional transmission electron microscopy and selected area electron diffraction. The experimental results presented here provide new mechanistic insights into NC self-assembly and oriented attachment.

With rising CO2 emissions and growing interests towards CO2 valorization, electrochemical CO2 reduction (eCO2R) has emerged as a promising prospect for carbon recycling and chemical energy storage. Yet, product selectivity and electrocatalyst longevity persist as obstacles to the broad implementation of eCO2R. A possible solution to ameliorate this challenge is to pulse the applied potential. However, it is currently unclear whether and how the trends and lessons obtained from the more conventional constant potential eCO2R translate to pulsed potential eCO2R. In this work, we report that the relationship between electrolyte concentration/composition and product distribution for pulsed potential eCO2R is different from constant potential eCO2R. In the case of constant potential eCO2R, increasing KHCO3 concentration favors the formation of H2 and CH4. In contrast, for pulsed potential eCO2R, H2 formation is suppressed due to the periodic desorption of surface protons, while CH4 is still favored. In the case of KCl, increasing the concentration during constant potential eCO2R does not affect product distribution, mainly producing H2 and CO. However, increasing KCl concentration during pulsed potential eCO2R persistently suppresses H2 formation and greatly favors C2 products, reaching 71 % Faradaic efficiency. Collectively, these results provide new mechanistic insights into the pulsed eCO2R mechanism within the context of proton‐donator ability and ionic conductivity.

We investigated the physicochemical and transport phenomena governing the selfassembly of colloidal nanoparticles at the interface of two immiscible fluids. By combining in situ grazing-incidence small-angle X-ray scattering (GISAXS) with a temporal resolution of 200 ms and electron microscopy measurements, we gained new insights into the coupled effects of solvent spreading, nanoparticle assembly, and recession of the vapor−liquid interface on the morphology of the self-assembled thin films. We focus on oleate-passivated PbSe nanoparticles dispersed across an ethylene glycol subphase as a model system and demonstrate how solvent parameters such as surface tension, nanoparticle solubility, aromaticity, and polarity influence the mesoscale morphology of the nanoparticle superlattice. We discovered that a nanoparticle precursor monolayer film spreads in front of the bulk solution and influences the fluid spreading across the subphase. Improved understanding of the impact of kinetic phenomena (i.e., solvent spreading and evaporation) on the superlattice morphology is important to describe the formation mechanism and ultimately enable the assembly of high-quality superlattices with long-range order.

Significant advances in the synthesis and processing of colloidal nanocrystals have given scientists and engineers access to a vast library of building blocks with precisely defined size, shape, and composition. These materials have inspired exciting prospects to enable bottom-up fabrication of programmable materials with properties by design. Successfully assembling and connecting the building blocks into superstructures in which constituent nanocrystals can purposefully interact requires robust understanding of and control over a complex interplay of dynamic physicochemical processes. Fluid interfaces provide an advantageous experimental workbench to both probe and control these processes. Despite the ostensible simplicity of fabricating nanocrystal assemblies at a fluid interface, sensitivity to processing conditions and limited reproducibility have underscored the complexity of this process. In situ studies have provided mechanistic insights into the competing dynamics of key subprocesses including solvent spreading and evaporation, superlattice formation, ligand detachment kinetics, and nanocrystal attachment. Understanding how these subprocesses influence the complex choreography of self-assembly, structure transformation, and oriented attachment processes presents a rich research challenge. In this context, we present a detailed methodology for self-assembly and attachment of lead chalcogenide nanocrystals at a liquid–gas interface as a model system for the fabrication of mono- and multilayer cubic connected superlattices. We discuss key experimental parameters such as the characteristics of the building blocks and processing conditions and detailed steps from colloidal nanocrystal injection to superlattice transfer. We hope that this Methods/Protocols paper will provide guidance for future advances in the exciting path toward bringing the prospect of nanocrystal-based programmable materials to fruition.