There has been very little progress in the power scaling of Er/Yb fiber lasers in over a decade, reflecting the difficulties involved. Here we report, to the best of our knowledge, a new record of 302 W single-mode power from an Er/Yb fiber master oscillator power amplifier (MOPA) with a record optical efficiency of 56%, near the quantum limit. This is made possible by new fiber development from Nufern and off-resonant pumping of the Er/Yb fiber. We also show that further power scaling is no longer limited by ytterbium parasitic lasing but by fiber fuse in the Er/Yb fiber.
Conventional models of Er/Yb co-doped fibers assume all ytterbium ions are equally involved in the energy transfer with erbium ions, governed by a singular transfer rate. This would predict output power clamping once ytterbium parasitic lasing starts, contrary to the observations that the output continued to grow albeit at a slower rate. One study explained this using elevated temperature at high powers. Our study, however, shows that elevated temperature and mode-dependent effects only play insignificant roles. A new model is developed based on the existence of isolated ytterbium ions, which can explain all the observed experimental behaviors.
Further power scaling of narrow-linewidth fiber lasers is critical for beam combining. Using all-solid photonic bandgap fibers with large effective mode areas and strong higher-order-mode suppression is an interesting approach. Previously, we demonstrated
∼
400
W
single-frequency single-mode power at 1064 nm from a 50/400 photonic bandgap fiber amplifier, limited only by transverse mode instability (TMI). In this work, we demonstrate a TMI-limited single-mode power of 1.37 kW from a monolithic fiber amplifier with a 25/400 photonic bandgap fiber, the highest output power from a photonic bandgap fiber demonstrated to date, to the best of our knowledge. The spectral linewidth is broadened to
∼
8
G
H
z
to suppress stimulated Brillouin scattering.
There have been several demonstrations of single-frequency single-mode ytterbium-doped fiber lasers operating at a few hundred watts of power. A narrow spectral linewidth of these lasers is critical for many applications but has never been properly measured before at high powers. In this work, we report the first spectral linewidth measurement at kHz resolution of high-power single-frequency fiber lasers using a heterodyne technique and can confirm that these lasers can indeed operate at a few kHz spectral linewidth. Furthermore, we have improved the power from single-frequency single-mode all-solid photonic bandgap fiber lasers to 500 W using an improved photonic bandgap fiber.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.