The use of acoustic panels is one of the most important methods for sound insulation in buildings. Moreover, it has become increasingly important to use green/natural origin materials in this area to reduce environmental impact. This study focuses on the investigation of acoustic, mechanical and thermal properties of natural fiber waste reinforced green epoxy composites. Three different types of fiber wastes were used, e.g., cotton, coconut and sugarcane with epoxy as the resin. Different fiber volume fractions, i.e., 10%, 15% and 20% for each fiber were used with a composite thickness of 3 mm. The sound absorption coefficient, impact strength, flexural strength, thermal conductivity, diffusivity, coefficient of thermal expansion and thermogravimetric properties of all samples were investigated. It has been found that by increasing the fiber content, the sound absorption coefficient also increases. The coconut fiber-based composites show a higher sound absorption coefficient than in the other fiber-reinforced composites. The impact and flexural strength of the cotton fiber-reinforced composite samples are higher than in other samples. The coefficient of thermal expansion of the cotton fiber-based composite is also higher than the other composites. Thermogravimetric analysis revealed that all the natural fiber-reinforced composites can sustain till 300 °C with a minor weight loss. The natural fiber-based composites can be used in building interiors, automotive body parts and household furniture. Such composite development is an ecofriendly approach to the acoustic world.
In the present condition of COVID-19, the demand for antimicrobial products such as face masks and surgical gowns has increased. Because of this increasing demand, there is a need to conduct a study on the development of antimicrobial material. Therefore, this study was conducted on the development of Aloe Vera and Polyvinyl Alcohol (AV/PVA) electrospun nanofibers. Four different fibers were developed by varying the concentrations of Aloe vera (0.5%, 1.5%, 2.5%, and 3%) while maintaining the concentration of PVA constant. The developed samples were subjected to different characterization techniques such as SEM, FTIR, XRD, TGA, and ICP studies. After that, the antimicrobial activity of the developed Aloe Vera/PVA electrospun nanofibers was checked against Gram-positive (Staphylococcus aureus) bacteria and Gram-negative (Escherichia coli) bacteria. The developed nanofibers had high profile antibacterial activity against both bacteria, but showed excellent results against S. aureus bacteria as compared with E. coli. These nanofibers have potential applications in the development of surgical gowns, gloves, etc.
Designing novel antiviral personal protective equipment (PPE) is crucial for preventing viral infections such as COVID-19 in humans. Here, we fabricate an electrospun nanofiber-based Viroblock (VB)-loaded polyacrylonitrile (PAN)/zinc oxide (ZnO) hybrid nanocomposite for PPE applications. Five different concentrations of Viroblock (0.5%, 1.5%, 2.5%, 3.5%, and 5%) were added to PAN/ZnO solution and loaded for electrospinning. The developed samples reflected antibacterial activity of 92.59% and 88.64% against Staphylococcus aureus and Pseudomonas aeruginosa bacteria, respectively, with 5% VB loading. Moreover, a significant reduction in virus titer (37%) was observed with the 5% VB/PAN/ZnO nanofiber sheet. Hence, VB-loaded PAN/ZnO nanofibers have great potential to kill enveloped viruses such as influenzas and coronaviruses and could be the ideal candidate for the development of nanofiber-based PPE, such as facemasks and surgical gowns, which can play a key role in the protection of frontline health workers and the general public in the COVID-19 pandemic.
Textile-based Scaffolds preparation has the attractive features to fulfill the stated and implied needs of the consumer but there are still challenges of stability, elongation, appreciable bio-compatibility, and stated hydrophilic behavior. To overcome these challenges, the authors tried to fabricate a scaffold by blending of two highly biocompatible polymers; polyvinyl alcohol and poly(1,4 cyclohexane isosorbide terephthalate) through co-electrospinning. The resultant scaffold by the stated innovative approach evaluated from different characterizations such as dimensional stability/morphology was evaluated by scanning electron microscopy, chemical interactions by that Fourier transmission infrared spectra, wetting behavior was analyzed by a static angle with a contact angle meter from drop method, elongation was examined by tensile strength tester and in-vitro assessment was done by MTT analysis. Based on verified results, it was concluded that PVA/PICT scaffold has a potential for dual nature of hydrophilicity & hydrophobicity and appreciable cell culture growth, stated dimensional stability and suitable elongation as per requirements of the nature of scaffold.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.