We present homogeneous quantum cascade lasers (QCLs) emitting around 3 THz which display bandwidths up to 950 GHz with a single stable beatnote. Devices are spontaneously operating in a harmonic comb state, and when in a dense mode regime they can be injection locked at the cavity roundtrip frequency with very small RF powers down to -55 dBm. When operated in the electrically unstable region of negative differential resistance, the device displays ultra-broadband operation exceeding 1.83THz (∆f /f = 50%) with high phase noise, exhibiting self-sustained, periodic voltage oscillations. The low CW threshold (115 A· cm −2 ) and broadband comb operation (∆f /f = 25%) make these sources extremely appealing for on-chip frequency comb applications.arXiv:1912.00890v1 [physics.optics]

Recently, there has been a growing interest in integrated THz photonics for various applications in communications, spectroscopy and sensing. We present a new integrated photonic platform based on active and passive elements integrated in a double-metal, high-confinement waveguide layout planarized with a low-loss polymer. An extended top metallization keeps waveguide losses low while improving dispersion, thermal and RF properties, as it enables to decouple the design of THz and microwave cavities. Free-running on-chip quantum cascade laser combs spanning 800 GHz, harmonic states with over 1.1 THz bandwidth and RF-injected broadband incoherent states spanning over nearly 1.6 THz are observed using a homogeneous quantum-cascade active core. With a strong external RF drive, actively mode-locked pulses as short as 4.4 ps can be produced, as measured by SWIFTS. We demonstrate as well passive waveguides with low insertion loss, enabling the tuning of the laser cavity boundary conditions and the co-integration of active and passive elements on the same THz photonic chip.

Because of the ultrafast and photon-driven nature of the transport in their active region, we demonstrate that quantum cascade lasers can be operated as resonantly amplified terahertz detectors with wide RF bandwidth. Tunable responsivities up to 50 V/W and noise equivalent powers down to 100 pW/Hz1/2 are demonstrated at 4.7 THz. Constant peak responsivities with respect to the detector temperature are observed up to 80 K. Thanks to the ≈ps intersub-band lifetime, electrical bandwidths larger than 20 GHz can be obtained, allowing the detection of optical beatnotes from quantum cascade THz frequency combs.

Multi-photon lithography allows us to complement planar photonic integrated circuits (PIC) by in-situ 3D-printed freeform waveguide structures. However, design and optimization of such freeform waveguides using time-domain Maxwell’s equations solvers often requires comparatively large computational volumes, within which the structure of interest only occupies a small fraction, thus leading to poor computational efficiency. In this paper, we present a solver-independent transformation-optics-(TO-) based technique that allows to greatly reduce the computational effort related to modeling of 3D freeform waveguides. The concept relies on transforming freeform waveguides with curved trajectories into equivalent waveguide structures with modified material properties but geometrically straight trajectories, that can be efficiently fit into rather small cuboid-shaped computational volumes. We demonstrate the viability of the technique and benchmark its performance using a series of different freeform waveguides, achieving a reduction of the simulation time by a factor of 3–6 with a significant potential for further improvement. We also fabricate and experimentally test the simulated waveguides by 3D-printing on a silicon photonic chip, and we find good agreement between the simulated and the measured transmission at λ = 1550 nm.

We present an antipodal Vivaldi antenna for broadband double metal waveguide terahertz quantum cascade lasers and frequency combs. Its exponentially curved flare profile results in an adiabatic in-plane mode expansion, producing an improved far-field with a single-lobed beam of (23 Â 19 ) full width half maximum with an octave-spanning bandwidth. The antenna also acts as a wave retarder, rotating the polarization from vertical toward horizontal polarization by a frequency-dependent angle. The laser's emission spectrum and current-voltage characteristics are not affected, as well as frequency comb operation. Measurements agree well with numerical simulations, and the proposed antenna covers a broad spectral range (1.5-4.5 THz).