Cost competitive electroreduction of CO2 to CO requires electrochemical systems that exhibit partial current density (j CO) exceeding 150 mA cm–2 at cell overpotentials (|ηcell|) less than 1 V. However, achieving such benchmarks remains difficult. Here, we report the electroreduction of CO2 on a supported gold catalyst in an alkaline flow electrolyzer with performance levels close to the economic viability criteria. Onset of CO production occurred at cell and cathode overpotentials of just −0.25 and −0.02 V, respectively. High j CO (∼99, 158 mA cm–2) was obtained at low |ηcell| (∼0.70, 0.94 V) and high CO energetic efficiency (∼63.8, 49.4%). The performance was stable for at least 8 h. Additionally, the onset cathode potentials, kinetic isotope effect, and Tafel slopes indicate the low overpotential production of CO in alkaline media to be the result of a pH-independent rate-determining step (i.e., electron transfer) in contrast to a pH-dependent overall process.

Carbon nanotubes (CNTs) have been recognized as a promising material in a wide range of applications from biotechnology to energy-related devices. However, the poor solubility in aqueous and organic solvents hindered the applications of CNTs. As studies have progressed, the methodology for CNT dispersion was established. In this methodology, the key issue is to covalently or non-covalently functionalize the surfaces of the CNTs with a dispersant. Among the various types of dispersions, polymer wrapping through non-covalent interactions is attractive in terms of the stability and homogeneity of the functionalization. Recently, by taking advantage of their stability, the wrapped-polymers have been utilized to support and/or reinforce the unique functionality of the CNTs, leading to the development of high-performance devices. In this review, various polymer wrapping approaches, together with the applications of the polymer-wrapped CNTs, are summarized.

A newly designed and fabricated novel nanocomposite composed of multiwalled carbon nanotubes (MWNTs), poly(benzimidazole) (PBI), and Pt nanoparticles. This composite is fabricated by the preparation of PBI-wrapped MWNTs (MWNT/PBI), followed by Pt loading onto the MWNT/PBI. As a result of the PBI wrapping, the loading efficiency of the Pt nanoparticles onto the MWNTs is dramatically improved up to 58.8% compared to that of the pristine MWNTs (41.0%). The process also allows homogeneous Pt immobilization onto the surface of MWNTs without any strong oxidation process for the MWNTs that is typically used for metal supporting on carbon nanotubes. Far-IR spectroscopy of the composite shows a peak from the Pt--N bonding, indicating that these improvements are derived from the coordination of the Pt ion with the PBI molecules. Cyclic voltammogram measurements reveal that the Pt nanoparticles deposited on the MWNT/PBI shows higher utilization efficiency (74%) for electrocatalysts compared to that on the pristine MWNT (39%).

Direct conversion from heat to electricity is one of the important technologies for a sustainable society since large quantities of energy are wasted as heat. We report the development of a single-walled carbon nanotube (SWNT)-based high conversion efficiency, air-stable and flexible thermoelectric material. We prepared cobaltocene-encapsulated SWNTs (denoted CoCp2@SWNTs) and revealed that the material showed a negative-type (n-type) semiconducting behaviour (Seebeck coefficient: −41.8 μV K−1 at 320 K). The CoCp2@SWNT film was found to show a high electrical conductivity (43,200 S m−1 at 320 K) and large power factor (75.4 μW m−1 K−2) and the performance was remarkably stable under atmospheric conditions over a wide range of temperatures. The thermoelectric figure of merit (ZT) value of the CoCp2@SWNT film (0.157 at 320 K) was highest among the reported n-type organic thermoelectric materials due to the large power factor and low thermal conductivity (0.15 W m−1 K−1). These characteristics of the n-type CoCp2@SWNTs allowed us to fabricate a p-n type thermoelectric device by combination with an empty SWNT-based p-type film. The fabricated device exhibited a highly efficient power generation close to the calculated values even without any air-protective coating due to the high stability of the SWNT-based materials under atmospheric conditions.

We now describe the finding that a copolymer of 9,9-dioctylfluorenyl-2,7-diyl and bipyridine (BPy) can extract in “one-pot” ≈96–97%-enriched (6,5)-SWNTs in m-xylene and p-xylene not containing metallic SWNTs, which was revealed by vis–near IR absorption, photoluminescence, and Raman spectroscopies.

Single-walled carbon nanotubes (SWNTs) have remarkable and unique electronic, mechanical, and thermal properties, which are closely related to their chiralities; thus, the chirality-selective recognition/extraction of the SWNTs is one of the central issues in nanotube science. However, any rational materials design enabling one to efficiently extract/solubilize pure SWNT with a desired chirality has yet not been demonstrated. Herein we report that certain chiral polyfluorene copolymers can well-recognize SWNTs with a certain chirality preferentially, leading to solubilization of specific chiral SWNTs. The chiral copolymers were prepared by the Ni(0)-catalyzed Yamamoto coupling reaction of 2,7-dibromo-9,9-di-n-decylfluorene and 2,7-dibromo-9,9-bis[(S)-(+)-2-methylbutyl]fluorene comonomers. The selectivity of the SWNT chirality was mainly determined by the relative fraction of the achiral and chiral side groups. By a molecular mechanics simulation, the cooperative interaction between the fluorene moiety, alkyl side chain, and graphene wall were responsible for the recognition/dissolution ability of SWNT chirality. This is a first example describing the rational design and synthesis of novel fluorene-based copolymers toward the recognition/extraction of targeted (n, m) chirality of the SWNTs.

No abstract

Toward the next generation fuel cell systems, the development of a novel electrocatalyst for the polymer electrolyte fuel cell (PEFC) is crucial to overcome the drawbacks of the present electrocatalyst. As a conductive supporting material for the catalyst, carbon nanotubes (CNTs) have emerged as a promising candidate, and many attempts have been carried out to introduce CNT, in place of carbon black. On the other hand, as a polymer electrolyte, polybenzimidazoles (PBIs) have been recognized as a powerful candidate due to the high proton conductivity above 100 °C under non-humid conditions. In 2008, we found that these two materials have a strong physical interaction and form a stable hybrid material, in which the PBIs uniformly wrap the surfaces of the CNTs. Furthermore, PBIs serve as effective binding sites for the formation of platinum (Pt) nanoparticles to fabricate a ternary composite (CNT/PBIs/Pt). In this review article, we summarize the fundamental properties of the CNT/PBIs/Pt and discuss their potential as a new electrocatalyst for the PEFC in comparison with the conventional ones. Furthermore, potential applications of CNT/PBIs including use of the materials for oxygen reduction catalysts and reinforcement of PBI films are summarized.