TRIP steel shows excellent mechanical properties such as greatly high strength, ductility and toughness by means of the appropriate combination of the strain-induced martensitic transformation (SIMT) behavior and the deformation behavior of each phase at crystal scale. In the past, the effect of grain size in the austenite on the deformation behavior of TRIP steel is investigated by introducing the grain size into a generalized model for the kinetics of SIMT. In order to validate the size-dependent kinetics modelling, it is necessary to simulate the deformation and SIMT behavior of the polycrystalline for the different grain size at the crystal scale. This study focuses on an investigation of SIMT behavior in polycrystalline TRIP steel by finite element simulation. The constitutive formula for monocrystalline TRIP steel including transformation strain in each variant system derived on the basis of the continuum crystal plasticity theory is applied. For the polycrystalline model, Voronoi tessellation is employed. The deformation behavior with a patterning process of martensitic phase in two different numbers of grains with initial crystal orientations for describing the deformation-related length scale is simulated under plane strain condition with two planar slip systems by a cellular automata approach.
In transformation-induced plasticity (TRIP) steel, the strain-induced martensitic transformation (SIMT) has a close relationship with the shear band formation. At a small length scale such as that of a crystal, the explicit analysis of the shear band structure with the formed microstructure is quite important for an adequate understanding of the SIMT. Here, a study on the microstructures formed by SIMT, related to shear band formation in both single and polycrystal TRIP steels, is presented. The constitutive equation for single crystal TRIP steel considering the transformation strain on each variant system is derived based on a rate-dependent crystal plasticity theory. To express the martensitic transformation, the cellular automata approach, including a transformation criterion acting as a local rule, is introduced. Numerical simulation is conducted with patterning processes of the martensitic phase at an infinite medium under the plane strain tension. It is found that the similar distributions of the plastic strain and the martensitic phase are dependent on the initial crystal orientation and appear as the shear band structures. In addition, the sizes of embryo and cell strongly influence the shear band formation and the martensitic volume fraction of crystal TRIP steel.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.