Electrified transport has multiple benefits but has also raised some concerns, for example, the flammable formulations used in lithium-ion batteries. Fires in traction batteries can be difficult to extinguish because the battery cells are well protected and hard to reach. To control the fire, firefighters must prolong the application of extinguishing media. In this work, extinguishing water from three vehicles and one battery pack fire test were analyzed for inorganic and organic pollutants, including particle-bound polycyclic aromatic hydrocarbons and soot content. Additionally, the acute toxicity of the collected extinguishing water on three aquatic species was determined. The vehicles used in the fire tests were both conventional petrol-fueled and battery electric. For all of the tests, the analysis of the extinguishing water showed high toxicity toward the tested aquatic species. Several metals and ions were found in concentrations above the corresponding surface water guideline values. Per- and polyfluoroalkyl substances were detected in concentrations ranging between 200 and 1400 ng L–1. Flushing the battery increased the concentration of per- and polyfluoroalkyl substances to 4700 ng L–1. Extinguishing water from the battery electric vehicle and the battery pack contained a higher concentration of nickel, cobalt, lithium, manganese, and fluoride compared with the water samples analyzed from the conventional vehicle.
The firefighting performance of eleven PFAS-free firefighting foams was evaluated using different fuels (Jet A1, commercial heptane and diesel) and types of water (freshwater and synthetic sea water). Moreover, different firefighting foam generation techniques and application methods were evaluated. The firefighting foams were generated as aspirated foams or as compressed air foams (CAFs). The results for CAF showed a higher performance, with respect to extinction time and burn-back resistance, compared to the foam generated using a UNI 86 nozzle. The CAF was not optimised, indicating a further potential of this foam generation technique. The results indicate that the time to fire knockdown decreases with decreasing foam viscosity. The heat flux was shown to be small, although the entire fuel surface was involved in the fire. The tests showed a dependence on fuel type; different products performed differently depending on the fuel. Tests using sea water showed that addition of salt to the foam solution generally prolonged the extinction time, although for one of the firefighting foams a shorter extinction time was observed. Out of the eleven evaluated PFAS-free products there was no product that outperformed the rest. None of the products in the study met the fire test performance requirements in all the referenced standards. Instead, the products seem to have different niches where they perform best e.g., with different types of fuel or water.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.