Abstract-This study develops a power assist suit (PAS) to assist laborers in agricultural work. This device is expected to reduce the strain produced by heavy agricultural work. During grape cultivation, pruning fruits in a posture, where workers have to keep their arms raised continuously, imposes a heavy burden on the workers including elderly. The objective of the PAS is to reduce the fatigue involved in the fruit pruning task by mounting a motor and spring-assisted mechanism on the suit. Quantifying the degree of fatigue reduction during agricultural work was necessary while developing the PAS. In this study, the surface electromyography (EMG), amount of energy expended, and exercise intensity were measured for motions similar to those involved in the shelf work in grape cultivation to verify the effects of reducing labor while wearing a PAS for agricultural work. The results demonstrated that the PAS developed for agricultural work could effectively reduce labor during static motions, such as maintaining postures.Index Terms-Power assist suit, agricultural work, surface EMG, energy expenditure, heart rate reserve.
in 1985, and became an associate professor in the Department of Electrical and Electronic Engineering, Tokyo Institute of Technology in 1991. He has been a professor in the system control engineering unit, Polytechnic University of Japan since 2015. His research interests include system control and smart automation. Prof. Takahashi is a member of SICE, IEEJ, IEICE, and RSJ.
Abstract-With the approach of the 2020 Tokyo Olympics and Paralympics, interest in sports for participants with disabilities has been steadily increasing. For Japan to be successful in the Paralympic sports, scientific and engineering support similar to that provided to other Olympic competitors is necessary. This study develops a multimodal strategy board to improve Japan's competitiveness in goalball, a team sport for visually impaired players. The proposed tool is composed of an image processing system that determines the ball's position and movement, and a strategy board that provides tactical information. This paper describes the method used to determine ball position from game video and the structure of a haptic device incorporated into the strategy board.Index Terms-Disability sports, goalball, image processing system, haptic device, multimodal strategy board.
Abstract-Agricultural power assist suits (PAS) have been developed and researched in our laboratory. In this study, the performance of a PAS is evaluated without burdening subjects through kinetic simulation. According to the formula for deriving energy consumption, the ratio of the energy consumption to the joint torque is same. Therefore, the joint torque of the knee is derived to investigate the influence of kinetic simulation the on femur. According to kinetic simulation, a PAS can reduce energy consumption. Further, the performance of PAS can be extracted by adjusting size. The validity of simulation is evaluated by comparing with other results. The simulation results and dynamics calculations agree well, but the actual measurements of some subjects show differences. The factors considered are the measurement error of the joint angle, difference in the position for pasting the electrode to measure the myopotential, and the asymmetry of muscle tension. Differences with considerable errors were observed for some test subjects in comparison with actual values, but a good match was observed for the case in which the PAS was worn for those test subjects that also showed a good match for the case without the PAS.
Wheelchair fittings are principally made on the basis of users' measurements and on the basis of the experience and knowledge of persons such as rehabilitation engineers at local rehabilitation centers. However, to choose a proper wheelchair among the diversity of options available, a quantitative evaluation of the propelling force of each particular wheelchair would be useful. Such evaluation systems have been developed, but for laboratory use only. Our study aims to establish a prototype of ambulatory propelling force measurement system which is built directly in the hub of one of the wheelchair wheels. In our previous research, measurement systems using magnetostrictive torque sensors had been described, but the excessive width and weight of such devices affected the results. To overcome this problem, a measurement system using a giant magnetostrictive material was developed. The excess width of the wheel is merely 25 mm and excess weight of the wheel is merely 1.7 kg. This system enabled us to measure the propelling force and speed of each wheelchair accurately. We also developed a mechanism to attach the measurement unit to the wheels of different diameters. Experiments were performed with units attached to 20-or 24-inch-diameter dedicated wheels. The results show that such a system is able to assess the propelling force, speed and left-right coordination both for adults and children.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.