We describe the concept and experimental demonstration of primary thermometry based on a four probe measurement of a single tunnel junction embedded within four arrays of junctions. We show that in this configuration random sample specific and environment-related errors can be avoided. This method relates temperature directly to Boltzmann constant, which will form the basis of the definition of temperature and realization of official temperature scales in the future.
The authors report a method to achieve Al–AlOx–Al tunnel junctions with high specific resistance in a controlled manner using a double oxidation technique. The technique is based on the standard method for oxidation repeated on an additional Al layer. The tunnel junctions were characterized with standard methods, such as comparison of room temperature resistance with liquid helium resistance and the authors found them to be of comparable quality to junctions fabricated with standard single oxidation. Fitting with the Simmons model suggests that both the barrier width and barrier height are consistent with those obtained in a single oxidation step. The junction specific capacitance was determined at low temperature to be 68fF∕μm2. These junctions, employed in low temperature measurements and applications, demonstrate expected and stable conductance characteristics. The double oxidation method is straightforward to implement in a basic setup for tunnel junction fabrication.
Articles you may be interested inSelf-assembled monolayers of poly(ethylene glycol) siloxane as a resist for ultrahigh-resolution electron beam lithography on silicon oxide Nonstatistical degradation and development characteristics of poly(methylmethacrylate) based resists during electron beam exposure Electron beam lithography of nanostructures using 2-propanol:water and 2-propanol:methyl isobutyl ketone as developers for poly-methylmethacrylate J.Accurate critical dimension control by using an azide/novolak resist process for electron-beam lithography Quantitative photoelectron spectromicroscopy has been used to study polymethylmethacrylate ͑PMMA͒ resist residues on SiO 2 surfaces after electron beam exposure and resist development. It was found that correctly exposed and developed PMMA leaves residues with an average thickness of about 1 nm. Higher exposure doses result in the decrease in film thickness, but with residues of about 0.5 nm. The technique can be applied as a powerful tool for surface and interface quality control in technology of electronic devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.