Recent powered (or robotic) prosthetic legs independently control different joints and time periods of the gait cycle, resulting in control parameters and switching rules that can be difficult to tune by clinicians. This challenge might be addressed by a unifying control model used by recent bipedal robots, in which virtual constraints define joint patterns as functions of a monotonic variable that continuously represents the gait cycle phase. In the first application of virtual constraints to amputee locomotion, this paper derives exact and approximate control laws for a partial feedback linearization to enforce virtual constraints on a prosthetic leg. We then encode a human-inspired invariance property called effective shape into virtual constraints for the stance period. After simulating the robustness of the partial feedback linearization to clinically meaningful conditions, we experimentally implement this control strategy on a powered transfemoral leg. We report the results of three amputee subjects walking overground and at variable cadences on a treadmill, demonstrating the clinical viability of this novel control approach.
In this paper, we study the human locomotor adaptation to the action of a powered exoskeleton providing assistive torque at the user's hip during walking. To this end, we propose a controller that provides the user's hip with a fraction of the nominal torque profile, adapted to the specific gait features of the user from Winter's reference data . The assistive controller has been implemented on the ALEX II exoskeleton and tested on ten healthy subjects. Experimental results show that when assisted by the exoskeleton, users can reduce the muscle effort compared to free walking. Despite providing assistance only to the hip joint, both hip and ankle muscles significantly reduced their activation, indicating a clear tradeoff between hip and ankle strategy to propel walking.
In this article, we propose a new method for providing assistance during cyclical movements. This method is trajectory-free, in the sense that it provides user assistance irrespective of the performed movement, and requires no other sensing than the assisting robot's own encoders. The approach is based on adaptive oscillators, i.e., mathematical tools that are capable of learning the high level features (frequency, envelope, etc.) of a periodic input signal. Here we present two experiments that we recently conducted to validate our approach: a simple sinusoidal movement of the elbow, that we designed as a proof-of-concept, and a walking experiment. In both cases, we collected evidence illustrating that our approach indeed assisted healthy subjects during movement execution. Owing to the intrinsic periodicity of daily life movements involving the lower-limbs, we postulate that our approach holds promise for the design of innovative rehabilitation and assistance protocols for the lower-limb, requiring little to no user-specific calibration.
We propose a novel method for movement assistance that is based on adaptive oscillators, i.e., mathematical tools that are capable of extracting the high-level features (amplitude, frequency, and offset) of a periodic signal. Such an oscillator acts like a filter on these features, but keeps its output in phase with respect to the input signal. Using a simple inverse model, we predicted the torque produced by human participants during rhythmic flexion-extension of the elbow. Feeding back a fraction of this estimated torque to the participant through an elbow exoskeleton, we were able to prove the assistance efficiency through a marked decrease of the biceps and triceps electromyography. Importantly, since the oscillator adapted to the movement imposed by the user, the method flexibly allowed us to change the movement pattern and was still efficient during the nonstationary epochs. This method holds promise for the development of new robot-assisted rehabilitation protocols because it does not require prespecifying a reference trajectory and does not require complex signal sensing or single-user calibration: the only signal that is measured is the position of the augmented joint. In this paper, we further demonstrate that this assistance was very intuitive for the participants who adapted almost instantaneously.
We present a lightweight robotic knee prosthesis with a novel hybrid actuation system that enables passive and active operation modes. The proposed hybrid knee uses a spring-damper system in combination with an electric motor and transmission system, which can be engaged to provide a stair ambulation capability. In comparison to fully powered prostheses that power all ambulation activities, a hybrid knee prosthesis can achieve significant weight reduction by focusing the design of the actuator on a subset of activities without losing the ability to produce equivalent torque and mechanical power in the active mode. The hybrid knee prototype weighs 1.7 kg, including battery and control, and can provide up to 125 Nm of repetitive torque. Experiments with two transfemoral amputee subjects show that the proposed hybrid knee prosthesis can support walking on level ground in the passive mode, as well as stair ambulation with a reciprocal gait pattern in the active mode.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.