The structure of Tvrđa and its buildings date back to the Middle Ages. Tvrđa represents the Old Town of the city of Osijek and the best-preserved and largest ensemble of Baroque buildings in Croatia. After the withdrawal of the Ottomans in 1687, during the 18th century, the Austro-Hungarian administration systematically formed a new fortification system, regulated streets and squares and built a large number of military objects. Tvrđa took its present form in the 19th century and has kept it since then. Investigating the historical development of individual buildings, in addition to archival sources and existing architectural documentation, the obvious source of information are the buildings themselves. The aim of this paper is to explore the possibilities of using infrared thermography to find structural elements and hidden openings in historic buildings in Osijek's Tvrđa. This paper describes the exploration of the 18th century openings on the facades of the former Kostić houses. The facades were bricked into the walls in the 19th century because houses were reused and their purposes changed from commercial to residential. Infrared thermography is often a starting, nondestructive testing method (NDT) for building analyses. This paper presents thermographic analyses of two buildings. The analyses were carried out in December 2017 and January 2018. Using a steady-state thermographic analysis of a building envelope as the first step, the audit was continued with step heating (SH) of an interest point where changes in a thermal pattern were expected due to additional bricking. Heat flux was generated by the usage of a heat gun for paint removal.
(1) Background: One-day surgery has been widely adopted for many elective laparoscopic procedures in pediatric patients. Recently, the same protocol has been investigated for some emergency procedures, such as laparoscopic appendectomy. This study aimed to evaluate the safety and effectiveness of discharge from hospital within 24 h in pediatric patients who received laparoscopic appendectomy for uncomplicated acute appendicitis. (2) Methods: From 1 March 2021 to 1 May 2022, a total of 180 pediatric patients who were discharged from hospital within 24 h after laparoscopic appendectomy for uncomplicated appendicitis were included in this prospective single-center study. The primary outcome of this study was the safety of discharge from hospital within 24 h after laparoscopic appendectomy for uncomplicated appendicitis, as well as the parental satisfaction with this protocol. Secondary outcomes included the rate of readmission or unplanned return to the operating room, the complication rate and a cost-effectiveness analysis. For each patient, demographic data, preoperative evaluation (physical examination, laboratory data, imaging), duration of surgery, intraoperative and postoperative complications, length of hospital stay and pain levels, as well as parental satisfaction with this protocol, were recorded. (3) Results: The median age was 11 years (interquartile range (IQR) 10, 14). The majority of the patients (63.8%) were males. The median length of hospital stay after surgery was 15 h (IQR 12, 19). The highest level of satisfaction, at discharge, was recorded in most of the respondents (n = 155, 86.1%), while the remaining 25 (13.9%) expressed moderate levels of satisfaction. The median pain levels according to a visual analogue scale for all postoperative days were low (range 0–4). In four patients (2.2%), unplanned readmission before the seventh postoperative day because of postoperative intraabdominal abscess was recorded. All patients with abscess formation were treated conservatively. The majority of the parents (n = 175; 97.2%) expressed the highest level of satisfaction during the outpatient follow-up examination on the seventh postoperative day. (4) Conclusions: Same-day discharge after laparoscopic appendectomy for simple appendicitis in pediatric patients was safe and feasible. Parental satisfaction with this protocol was very high. With the right protocol and parent education, pediatric patients who underwent laparoscopic appendectomy because of non-complicated acute appendicitis may be successfully treated in this way.
In certain cases, the application of traditional measurement techniques and related procedures for supercapacitor parameter extraction in time‐domain could be an unnecessarily time‐consuming process, which also requires different sets of measurement equipment, commonly expensive. This is a strong motivation for the development of procedures for supercapacitor parameter extraction which complies with the above. One such is presented in this paper. This paper presents a model of supercapacitors based on two parallel RC branches, respectively, as a second‐order system described by four parameters. In this paper, we will show that even a very simple second‐order model credibly describes a supercapacitor in a dynamic regime of a rapid discharging process. Also, we proposed an improved set of expressions that establish the relations between the supercapacitor parameters and measured quantities as well as the procedure for parameter extraction in time domain. We demonstrated that using a generalised least square method and the provided set of analytical expressions is a powerful and effective tool in supercapacitor parameter extraction from the waveform of supercapacitor current in rapid discharge regime. The validity of the proposed approach, expressions, and obtained parameters was confirmed by comparing the waveforms of short‐circuit current obtained by an experiment and a simulation.
The purpose of this research was to analyze the applicability of infrared thermography in assessing the condition of an e-bike battery. The main challenge was to interpret the surface radiation detected by a thermal imaging camera. In addition to basic challenges of thermography, such as determining the emissivity, the angle of image acquisition, the problem of low resolution and thermal inertia, it was necessary to understand the physical behavior of the elements inside the battery and battery pack that respectively determine the dynamics and shape of the thermal pattern. E-bike batteries are mainly composed of 18650 format Li-ion cells, and the topology of the battery cell is related to the energy profile of the system. With the aim of establishing a link between the surface radiation patterns and the parameters of the individual 18650 cells that dictate the internal thermal behavior, a detailed analysis of the battery pack interior, upon its lifetime, was performed. Based on the results of the capacity analysis of the individual cells and determination of the exact position of the cells within the structure of the battery, a visualization and comparison with the thermographic records were performed to determine whether infrared thermography is able to diversify faulty cells. The conclusion of the study is that it is not possible to make a judgment about the thermal pattern expression or the pattern shape based on the estimated capacity values; however, based on the pattern, it is possible to draw a conclusion about the homogeneity of the capacity of the individual battery cells.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.