We propose an improved method to retrieve the effective constitutive parameters (permittivity and permeability) of a slab of metamaterial from the measurement of S parameters. Improvements over existing methods include the determination of the first boundary and the thickness of the effective slab, the selection of the correct sign of effective impedance, and a mathematical method to choose the correct branch of the real part of the refractive index. The sensitivity of the effective constitutive parameters to the accuracy of the S parameters is also discussed. The method has been applied to various metamaterials and the successful retrieval results prove its effectiveness and robustness.

We analyze an S-shaped inclusion for the realization of metamaterials exhibiting left-handed properties. Unlike most of the conventional inclusions used so far that are composed of two separate geometries-typically a split ring and a rod-the inclusion proposed in this paper is made of only one S-shaped element which yields an overlapping negative permittivity and negative permeability response over a frequency band of about 2.6 GHz. By adopting this geometry, we manage to lower the negative permittivity frequency band down to the level of the negative permeability frequency band, thus allowing the overlapping to occur. Therefore, the structure works as a stand alone and does not require the use of an additional rod. A theoretical analysis is carried out to study this inclusion and numerical simulations, as well as a Snell refraction experiment, clearly show that the material indeed exhibits a negative index of refraction at some frequencies. The simple pattern of the inclusion, the wide left-handed frequency band exhibited, and the low losses measured indicate the superiority of this inclusion in the realization of left-handed metamaterials.

We demonstrate that by utilizing displacement currents in simple dielectric resonators instead of conduction currents in metallic split-ring resonators and by additionally exciting the proper modes, left-handed properties can be observed in an array of high dielectric resonators. Theoretical analysis and experimental measurements show that the modes, as well as the subwavelength resonance, play an important role in the origin of the left-handed properties. The proposed implementation of a left-handed metamaterial, based on a purely dielectric configuration, opens the possibility of realizing media at terahertz frequencies since scaling issues and losses, two major drawbacks of metal-based structures, are avoided.

Microwave breast imaging (using electromagnetic waves of frequencies around 1 GHz) has mostly remained at the research level for the past decade, gaining little clinical acceptance. The major hurdles limiting patient use are both at the hardware level (challenges in collecting accurate and noncorrupted data) and software level (often plagued by unrealistic reconstruction times in the tens of hours). In this paper we report improvements that address both issues. First, the hardware is able to measure signals down to levels compatible with sub-centimeter image resolution while keeping an exam time under 2 min. Second, the software overcomes the enormous time burden and produces similarly accurate images in less than 20 min. The combination of the new hardware and software allows us to produce and report here the first clinical 3-D microwave tomographic images of the breast. Two clinical examples are selected out of 400+ exams conducted at the Dartmouth Hitchcock Medical Center (Lebanon, NH). The first example demonstrates the potential usefulness of our system for breast cancer screening while the second example focuses on therapy monitoring.