Outside the wide range of potential benefits, the use of nanomaterials can endanger human health, mostly through skin contact and the risk of inhalation. This article presents the results of harmonized measurements with contextual information on the emission of nanoparticles during the manufacturing and application of nanotechnology products. The purpose of the research was to investigate the actual levels of exposure to nano-objects in real working conditions in chosen Polish companies. Measurements were carried out in various workplaces: during silver nanoparticle synthesis, production of thin nanocarbon layers, 3D-printing with the use of a nanohydroxyapatite-polymer composite and the production of special seals from thin glass foils. Research was conducted on the basis of task-based measurements and offline microscopic analysis. Realtime particle DiSCmini counters were used to determine the nano-object concentration during different processes and events: samplers for collecting air dust, and a scanning electron microscope to confirm the presence of
Ventilation and air conditioning systems are necessary for developing proper parameters of indoor environment in operating rooms. The main task of ventilation and air conditioning in those specific areas consists in creating desirable temperature, reducing the number of microorganisms and the concentrations of hazardous gases and substances in the air, as well as ensuring the proper direction of airflow. In Poland, indoor environment in operating rooms has to comply with the requirements set out in three regulations ( No. 31, item 158, as amended) and the document entitled "Guidelines for the design of general hospitals". Given insufficient accuracy of the abovementioned national documents, it is a common practice to use foreign standards, i.e. ASHRAE Standard 170-2013, DIN 1946-4: 2008 and FprCEN TR 16244: 2011. When considering the conditions for thermal comfort, it is important to bear in mind a close link between air flow velocity and air temperature. Air in the zone occupied by patients and medical staff must not cause the sensation of draft. Furthermore, air velocity should be sufficient to eliminate interference caused by the presence of people and other sources of heat. It should also reduce the turbulence level in the air in the operating room. Efficient functioning of ventilation and air conditioning was tested during treatments and operations carried out on three wards of a Warsaw hospital. Tests were performed with the participation of medical staff from various surgical units. They were asked to perform minor manual tasks to simulate work on the operating table, and to complete a questionnaire on subjective thermal sensation. The applied methodology is widely used during testing of general and local ventilation in public buildings. Air temperature, relative humidity, air flow supply and exhaust air from the operating room were determined on the basis of VelociCalc 8360 and Testo 435 anemometers with a 3-function probe and 3 vane probes with the diameter of 16 mm, 60 mm and 100 mm. Throughout the study, microclimate conditions in the operating rooms were controlled by the EHA MM101 microclimate meter. Test results showed that the microclimate parameters met the requirements of the aforementioned documents. However, individual thermal sensations reported by the medical staff pointed to the lack of thermal comfort and, in extreme cases, e.g. when using lead aprons during operations, perception of the thermal environment as 'very hot'. The efficiency and type of air distribution in operating rooms has a decisive effect on the results.
Grains of the Polish winter wheat variety Begra were subjected to gamma-radiation (grain harvested in 1996) within the dose range of 0.05-10 kGy and microwave heating (grain harvested in 1997) from 28 degrees C to 98 degrees C. Later the grains were divided into two parts, the first was used for direct analyses after treatment. The second part was sown on the experimental fields. The obtained crop was described as the first generation and divided into two parts. One part was destined to determination of starch properties and the second part was sown in order to obtain the second generation crop. The same pattern was conducted in order to achieve the third generation crop. gamma-Irradiation directly applied on the wheat grain reduced statistically significant falling number values and gelatinisation enthalpy (deltaH) of the grain treated by 5 and 10 kGy. Calculated linear regression correlation coefficient between the falling number values and the gelatinisation enthalpy was equal to 0.94 (p < or = 0.001) and showed that these two starch characteristics are well correlated in the case of directly irradiated wheat grain. The falling number values, peak temperatures (Tp) and gelatinisation enthalpy (deltaH), in three generations of wheat grain crop studied, did not show any statistically significant differences as a result of indirect effect of gamma-irradiation. Microwave direct heating of wheat grain to 98 degrees C caused a statistically significant increase in the falling number value and decrease in starch gelatinisation power expressed by the enthalpy of gelatinisation (deltaH). The statistically significant changes in the falling number values, slight changes in the peak temperatures (Tp) and enthalpy of gelatinisation (deltaH) were found in all three generation crops as an indirect effect of microwave heating.
A distributed real-time program is usually executed on a limited set of hardware resources and is required to satisfy timing constraints, despite anticipated hardware failures. Static analysis of the timing properties of such programs is often infeasible. This paper shows how to formally reason aboui these programs when scheduling decisions are made on-line and take into account deadlines, toaA and hardware failures. We use Timed CCS as a process description language, define a language to describe anticipated faults and apply a version of trr-calculus to specify and verify timing pioperties. This allows the property of schedulability to be the outcome of an equaiion-solving problem. And unlike conventional reasoning, the logis is fault-monotonic: rf correctness is proved for a number of faults, correctness for any subset of these faults is guaranteed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.