The James Webb Space Telescope (JWST) Coarse Phase Sensor utilizes Dispersed Hartmann Sensing (DHS) 1 to measure the inter-segment piston errors of the primary mirror. The DHS technique was tested on the Keck Telescope. Two DHS optical components were built to mate with the Keck optical and mechanical interfaces. DHS images were acquired using 20 different primary mirror configurations. The mirror configurations consisted of random segment pistons applied to 18 of the 36 segments. The inter-segment piston errors ranged from phased (approximately 0 µm) to as large as ±25 µm. Two broadband exposures were taken for each primary mirror configuration: one for the DHS component situated at 0°, and one for the DHS component situated at 60°. Finally, a "closed-loop" DHS sensing and control experiment was performed. Sensing algorithms developed by both Adaptive Optics Associates (AOA) and the Jet Propulsion Laboratory (JPL) 2 were applied to the collected DHS images. The inter-segment piston errors determined by the AOA and JPL algorithms were compared to the actual piston steps. The data clearly demonstrates that the DHS works quite well as an estimator of segment-to-segment piston errors using stellar sources.
The design of the Southern African Large Telescope (SALT), which is based closely on the Hobby-Eberly Telescope (HET) at the University of Texas but includes advances incorporating lessons learned from HET, is briefly reviewed. The flowdown of requirements from the optical error budget to the primary mirror control subsystems is presented. The techniques and algorithms used by the Center of Curvature Alignment Sensor (CCAS) to measure segment tilt and piston and estimate the global radius of curvature of the primary are discussed in detail. The steps in the process that allows CCAS to capture and identify segments misaligned by more than 70 arcsec and bring them into alignment with residual errors less than 50milli-arcsec is fully described. Next, the hardware and software designs of CCAS are presented, as well as the results of laboratory performance testing. CCAS has been installed and integrated with the primary mirror control system. Performance results of the integrated system over a range of environmental conditions will be shown. Finally, the overall results of this project are summarized and suggestions for future improvements presented.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.