The present paper reports a novel method to improve the properties of polyethylene (PE) and polypropylene (PP) polymer foils suitable for applications in food packaging. It relates to the adsorption of chitosan-colloidal systems onto untreated and oxygen plasma-treated foil surfaces. It is hypothesized that the first coated layer of chitosan macromolecular solution enables excellent antibacterial properties, while the second (uppermost) layer contains a network of polyphenol resveratrol, embedded into chitosan nanoparticles, which enables antioxidant and antimicrobial properties simultaneously. X-ray photon spectroscopy (XPS) and infrared spectroscopy (FTIR) showed successful binding of both coatings onto foils as confirmed by gravimetric method. In addition, both attached layers (chitosan macromolecular solution and dispersion of chitosan nanoparticles with incorporated resveratrol) onto foils reduced oxygen permeability and wetting contact angle of foils; the latter indicates good anti-fog foil properties. Reduction of both oxygen permeability and wetting contact angle is more pronounced when foils are previously activated by O2 plasma. Moreover, oxygen plasma treatment improves stability and adhesion of chitosan structured adsorbates onto PP and PE foils. Foils also exhibit over 90% reduction of Staphylococcus aureus and over 77% reduction of Escherichia coli as compared to untreated foils and increase antioxidant activity for over a factor of 10. The present method may be useful in different packaging applications such as food (meat, vegetables, dairy, and bakery products) and pharmaceutical packaging, where such properties of foils are desired.
Two-layer functional coatings for polyethylene (PE) and polypropylene (PP) films were developed for the active packaging concept. Prior to coating, the polymer films were activated by O2 and NH3 plasma to increase their surface free energy and to improve the binding capacity and stability of the coatings. The first layer was prepared from a macromolecular chitosan solution, while the second (upper) layer contained chitosan particles with embedded catechin or pomegranate extract. Functionalized films were analyzed physico-chemically to elemental composition using ATR-FTIR spectroscopy and XPS. Further, oxygen permeability and wettability (Contact Angle) were examined. The antimicrobial properties were analyzed by the standard ISO 22196 method, while the antioxidative properties were determined with an ABTS assay. Functionalized films show excellent antioxidative and antimicrobial efficacy. A huge decrease in oxygen permeability was achieved in addition. Moreover, a desorption experiment was also performed, confirming that the migration profile of a compound from the surfaces was in accordance with the required overall migration limit. All these properties indicate the great potential of the developed active films/foils for end-uses in food packaging.
In this paper, we focus on the preparation of electrospun composite nanofibrous materials based on (poly)-phenol-polysaccharide formulation. The prepared composite nanofibres are ideally suited as a controlled drug delivery system, especially for local treatment of different wounds, owing to their high surface and volume porosity and small fibre diameter. To evaluate the formulations, catechin and resveratrol were used as antioxidants. Both substances were embedded into chitosan particles, and further subjected to electrospinning. Formulations were characterized by determination of the particle size, encapsulation efficiency, as well as antioxidant and antimicrobial properties. The electrospinning process was optimised through fine-tuning of the electrospinning solution and the electrospinning parameters. Scanning electron microscopy was used to evaluate the (nano)fibrous structure, while the successful incorporation of bio substances was assessed by X-ray Photoelectron Spectroscopy and Fourier transform infrared spectroscopy. The bioactive properties of the formed nanofibre -mats were evaluated by measuring the antioxidative efficiency and antimicrobial properties, followed by in vitro substance release tests. The prepared materials are bioactive, have antimicrobial and antioxidative properties and at the same time allow the release of the incorporated substances, which assures a promising use in medical applications, especially in wound care.
Seaweeds are a potentially sustainable source of natural antioxidants that can be used in the food industry and possibly for the development of new sustainable packaging materials with the ability to extend the shelf-life of foods and reduce oxidation. With this in mind, the seasonal variations in the chemical composition and antioxidant activity of brown seaweed (Padina pavonica) extracts were investigated. The highest total phenolic content (TPC) and antioxidant activity (measured by ferric reducing/antioxidant power (FRAP), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, and oxygen radical absorbance capacity (ORAC)) were found for P. pavonica June extract. The TPC of 26.69 ± 1.86 mg gallic acid equivalent/g, FRAP of 352.82 ± 15.41 µmole Trolox equivalent (TE)/L, DPPH of 52.51 ± 2.81% inhibition, and ORAC of 76.45 ± 1.47 µmole TE/L were detected. Therefore, this extract was chosen for the development of bioactive PLA bilayer film, along with chitosan. Primary or quaternary chitosan was used as the first layer on polylactic acid (PLA) films. A suspension of chitosan particles with entrapped P. pavonica extract was used as the second layer. X-ray photoelectron spectroscopy confirmed the presence of layers on the material surface. The highest recorded antioxidant activity of the newly developed films was 63.82% inhibition. The developed functional films exhibited antifogging and antioxidant properties, showing the potential for application in the food industry.
Due to the growing problem of food and packaging waste, environmental awareness, and customer requirements for food safety, there is a great need for the development of innovative and functional packaging. Among these developments, the concept of active packaging is at the forefront. The shortcoming in this area is that there is still a lack of multifunctional concepts, as well as green approaches. Therefore, this work focuses on the development of active chemical substances of natural origin applied as a coating on polylactic acid (PLA) films. Biopolymer chitosan and plant extracts rich in phenolic compounds (blackberry leaves—Rubus fruticosus, needles of prickly juniper—Juniperus oxycedrus) obtained from plant biomass from Southeastern Europe were selected in this work. In order to increase the effectiveness of individual substances and to introduce multifunctionality, they were combined in the form of different colloidal structural formulations. The plant extracts were embedded in chitosan biopolymer particles and dispersed in a macromolecular chitosan solution. In addition, a two-layer coating, the first of a macromolecular chitosan solution, and the second of a dispersion of the embedded extracts in chitosan particles, was applied to the PLA films as a novel approach. The success of the coatings was monitored by X-ray photoelectron spectroscopy (XPS) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and the wettability was evaluated by contact angle measurements. Scanning electron microscopy SEM tracked the morphology and homogeneity of the coating. Antioxidation was studied by DPPH and ABTS spectrophotometric tests, and microbiological analysis of the films was performed according to the ISO 22196 Standard. Desorption of the coating from the PLA was monitored by reducing the elemental composition of the films themselves. The successful functionalization of PLA was demonstrated, while the XPS and ATR-FTIR analyses clearly showed the peaks of elemental composition of the extracts and chitosan on the PLA surface. Moreover, in all cases, the contact angle of the bilayer coatings decreased by more than 35–60% and contributed to the anti-fogging properties. The desorption experiments, due to decrease in the concentration of the specific typical element (nitrogen), indicated some migration of substances from the PLA’s surface. The newly developed films also exhibited antioxidant properties, with antioxidant ABTS efficiencies ranging from 83.5 to 100% and a quite high inhibition of Gram-positive Staphylococcus aureus bacteria, averaging over 95%. The current functionalization of PLA simultaneously confers antifogging, antioxidant, and antimicrobial properties and drives the development of a biodegradable and environmentally friendly composite material using green chemistry principles.
Polyethylene (PE) material in the form of foils as conventional packaging material was functionalised with polysaccharide pullulan and an additional layer of chitosan macromolecular solution. In this study, the best concentration of pullulan (10%, 20% or 30%) was determined with the objective of improving the barrier properties of conventional PE food packaging material. As additional layer, a chitosan macromolecular solution was adsorbed to the material in order to endow it with antimicrobial activity. In this way, a functional composite material was developed, which can find potential application as active packaging, to offer prolonged shelf-life to packaged food. The functionalized PE material was analysed from the physico-chemical point of view (gravimetric analysis, goniometry, FTIR spectroscopy, standard test for oxygen permeability, SEM analysis). Moreover, antimicrobial testing of the foils was done and the desorption of both polysaccharides from the PE surface was evaluated. The latter properties are essential when evaluating the practical value of active packaging.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.