The PSI-graphene, a two-dimensional structure, was a novel carbon allotrope. In this paper, based on molecular dynamics simulation, the effects of stretching direction, temperature and vacancy defects on the mechanical properties of PSI-graphene were studied. We found that when PSI-graphene was stretched along 0° and 90° at 300 K, the ultimate strength reached a maximum of about 65 GPa. And when stretched along 54.2° and 155.2° at 300 K, the Young’s modulus had peaks, which were 1105 GPa and 2082 GPa, respectively. In addition, when the temperature was raised from 300 K to 900 K, the ultimate strength in all directions was reduced. The fracture morphology of PSI-graphene stretched at different angles was also shown in the text. In addition, the number of points removed from PSI-graphene sheet also seriously affected the tensile properties of the material. It was found that, compared with graphene, PSI-graphene didn’t have the negative Poisson’s ratio phenomenon when it was stretched along the direction of 0°, 11.2°, 24.8° and 34.7°. Our results provided a reference for studying the multi-angle stretching of other carbon structures at various temperatures.

Carbon honeycomb has a nanoporous structure with good mechanical properties including strength. Here we investigate the adsorption and diffusion of hydrogen in carbon honeycomb via grand canonical Monte Carlo simulations and molecular dynamics simulations including strength. Based on the adsorption simulations, molecular dynamics simulations are employed to study the effect of pressure and temperature for the adsorption and diffusion of hydrogen. To study the effect of pressure, we select the 0.1, 1, 5, 10, 15, and 20 bars. Meanwhile, we have studied the hydrogen storage capacities of the carbon honeycomb at 77 K, 153 K, 193 K, 253 K and 298 K. A high hydrogen adsorption of 4.36 wt.% is achieved at 77 K and 20 bars. The excellent mechanical properties of carbon honeycomb and its unique three-dimensional honeycomb microporous structure provide a strong guarantee for its application in practical engineering fields.

Silicon carbide has excellent properties such as high hardness and decomposition temperature, but its applications are limited by its poor toughness. Here, we investigate the enhancement of SiC’s toughness by compositing silicon carbide–aluminum (SiC–Al) interpenetrating phase composites (IPCs) via molecular dynamics simulations. IPCs are a class of composites consisting of two or more phases that are topologically continuous and three-dimensionally interconnected through the microstructure. The Young’s modulus and ultimate strength gradually increases with an increment of the volume fraction of SiC, opposite to the fracture strain. The interface between SiC and Al affects the mechanical properties of SiC–Al IPCs. When the volume fraction of SiC is less than 0.784, the attenuation rate of ultimate strength and fracture strain decreases. The attenuation rate increases when the volume fraction of SiC is more than 0.784. There are a minimum of ultimate strength and fracture strain at the 0.784, 0.7382 and 2.8610, respectively. The hardness of SiC–Al IPCs is about 48% of SiC. The change of SiC–Al IPCs hardness is more stable than that of SiC in the later stage of the nanoindentation test.