Cyclic steam stimulation (CSS) is a typical enhanced oil recovery method for heavy oil reservoirs. In this paper, a new model for the productivity of a CSS well in multilayer heavy oil reservoirs is proposed. First, for the steam volume of each formation layer, it is proposed that the total steam injection volume will be split by the formation factor (Kh) for the commingled steam injection mode. Then, based on the equivalent flow resistance principle, the productivity model can be derived. In this model, the heavy oil reservoir is composed of a cold zone, a hot water zone, and a steam zone. Next, using the energy conservation law, the equivalent heating radius can be calculated with the consideration of the steam overlay. Simultaneously, a correlation between the threshold pressure gradient (TPG) and oil mobility is also applied for the productivity formula in the cold zone and the hot water zone. Afterward, this model is validated by comparing the simulation results with the results of an actual CNOOC CSS well. A good agreement is observed, and the relative error of the cumulative oil production is about 2.20%. The sensitivity analysis results indicate that the effect of the bottom hole pressure is the most significant, followed by the TPG, and the effect of the steam overlay is relatively slight. The formation factor can affect the splitting of the steam volume in each layer; thus, the oil production rate will be impacted. The proposed mathematical model in this paper provides an effective method for the prediction of preliminary productivity of a CSS well in a multilayer heavy oil reservoir.
Cyclic steam stimulation is an effective thermal recovery method for heavy oil recovery. The key potential mechanism is the growth of the steam chamber after steam injection. Taking the LD5X heavy oil reservoir as an example, besides the interlayer developed in this area, the top water and bottom water distribute above and below the interlayer. These factors may have adverse effects on the development of the steam chamber, thus affecting the final heavy oil exploitation. In this work, our goal is to study the effects of interlayer permeability and well–interlayer distance on CSS performance (in the presence of top and bottom water). We developed a high-temperature-resistant interlayer. Based on the simulated interlayer, the field scale model was converted into a laboratory element model through the similarity criterion. In order to quantitatively evaluate the performance of steam stimulation, a thermal detector was used to measure the dynamic growth of the steam chamber and record the production data. The experimental results show that the self-made interlayer has high-temperature resistance, adjustable permeability, and little difference between the physical parameters and the target interlayer. During the cyclic steam stimulation process, the steam chamber presents two different stages in the presence of the top water area, namely the normal production stage and the top water discharge stage. The bottom water has little effect on the growth of the steam chamber. The small interlayer permeability, the increase in horizontal well–interlayer distance, and the existence of the interlayer will delay the top water leakage during steam stimulation. This study has reference significance for us to develop heavy oil resources with a top water barrier when implementing steam stimulation technology.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.