Easy processing and flexibility of polymer electrolytes make them very promising in developing all-solid-state lithium batteries. However, their low room-temperature conductivity and poor mechanical and thermal properties still hinder their applications. Here, we use LiLaZrTaO (LLZTO) ceramics to trigger structural modification of poly(vinylidene fluoride) (PVDF) polymer electrolyte. By combining experiments and first-principle calculations, we find that La atom of LLZTO could complex with the N atom and C═O group of solvent molecules such as N,N-dimethylformamide along with electrons enriching at the N atom, which behaves like a Lewis base and induces the chemical dehydrofluorination of the PVDF skeleton. Partially modified PVDF chains activate the interactions between the PVDF matrix, lithium salt, and LLZTO fillers, hence leading to significantly improved performance of the flexible electrolyte membrane (e.g., a high ionic conductivity of about 5 × 10 S cm at 25 °C, high mechanical strength, and good thermal stability). For further illustration, a solid-state lithium battery of LiCoO|PVDF-based membrane|Li is fabricated and delivers satisfactory rate capability and cycling stability at room temperature. Our study indicates that the LLZTO modifying PVDF membrane is a promising electrolyte used for all-solid-state lithium batteries.

No abstract

Coal bed Methane (CBM), a primary component of natural gas, is a relatively clean source of energy.Nevertheless, the impact of considerable coal mine methane emission on climate change in China has gained an increasing attention as coal production has powered the country's economic development. It is well-known that coal bed methane is a typical greenhouse gas, the greenhouse effect index of which is 30 times larger than that of carbon dioxide. Besides, gas disasters such as gas explosive and outburst, etc. pose a great threat to the safety of miners. Therefore, measures must be taken to capture coal mine methane before mining. This helps to enhance safety during mining and extract an environmentally friendly gas as well. However, as a majority of coal seams in China have low-permeability, it is difficult to achieve efficient methane drainage. Enhancing coal permeability is a good choice for high-efficiency drainage of coal mine methane. In this paper, a modified coal-methane co-exploitation model was established and a combination of drilling-slotting-separation-sealing was proposed to enhance coal permeability and CBM recovery. Firstly, rapid drilling assisted by water-jet and significant permeability enhancement via pressure relief were investigated, guiding the fracture network formation around borehole for high efficient gas flow. Secondly, based on the principle of swirl separation, the coal-water-gas separation instrument was developed to eliminate the risk of gas accumulation during slotting and reduce the gas emission from the ventilation air. Thirdly, to improve the performance of sealing material, we developed a novel cement-based composite sealing material based on the microcapsule technique. Additionally, a novel sealing-isolation combination technique was also proposed. Results of field test indicate that gas concentration in slotted boreholes is 1.05-1.91 times higher than that in conventional boreholes. Thus, the proposed novel integrated techniques achieve the goal of high-efficiency coal bed methane recovery.

No abstract

No abstract

No abstract

On the incorporation of Mg and the role of oxygen, silicon, and hydrogen in GaN prepared by reactive molecular beam epitaxy

No abstract