Polymeric nanocomposites are the materials incorporating nanosized inclusions into the polymer matrixes. The result of the addition of nanoparticles/fibers is a drastic improvement in properties that may include mechanical, electrical, thermal conductivity, or even the acoustical properties. Polymer nanocomposites have spawned huge interest for the development of high‐performance products such as lightweight sensors, thin‐film capacitors, batteries, flame retardant products, biodegradable and biocompatible materials, and so on. The field of polymer nanocomposites has been at the forefront of research in the polymer community for the past few decades and an extremely large number of scientific papers have been published. Nevertheless, application‐oriented guidelines for selecting the ecofriendly nanocomposites for advanced industrial applications are missing in the state of the art. This review article summarizes the current state‐of‐the‐art polymeric nanocomposites, highlighting prominent nanofillers categorized based on their applications, origins, dimensional characteristics, and so on. Each filler type contains a short description of its main feature together with the most relevant and potential applications. To address the global concern about nondegradable wastes, novel green alternatives of each nanofiller type are discussed. Special attention is also given to the biocompatibility properties of the composites. This study provides a state‐of‐the‐art road map to select multifunctional polymeric nanocomposites from huge varieties for advanced industrial applications.

Electrically conductive polymers can combine the advantage of plastic processing with the unique electrical properties which are usually found in metals. This article presents a feasibility study of an electrically conductive plastic for hearing aid antennas. Focus will be placed to critically analyse the electrical properties of the potential conductive plastic in a two component injection moulding process chain. The purpose of this experimental study is to mimic the real scenario in a hearing aid device and conclude the antenna's efficiency based on the results obtained with OTA (over the air) 3D measuring system in comparison with an ideal copper antenna at 2.4 GHz. An analysis of the association between the conductive plastic processing parameters in regards to its electrical performance is discussed and evaluated.(1 line space)