This study examines the effect of energetic surface treatment on the adhesion strength of high-density polyethylene (HDPE), polypropylene (PP) and polyethylene terephthalate (PET) substrates. The purpose of this work is to determine the surface wettability of polymers suitable for food contact. These plastics have been treated with various pre-treatment methods to improve surface tension and good adhesion for inkjet printing and avoid any visual changes. It is important to determine the adhesion of the ink to the polymer surface to improve post-consumer recycling. Digital inks have been tested on various treated plastics to analyse coating properties and adhesion forces in accordance with DIN ISO 2409 standards. The impact of the inkjet droplet on the treated and non-treated surface was also investigated using the COMSOL computer simulation software.

This article presents a numerical simulation of a printhead model for drop-on-demand (DoD) inkjet printers. A three-dimensional droplet model is provided for the numerical study of inks, ejection parameters, droplet movement, and the analysis of droplet impacts on the surface. This work is devoted to the analysis of different droplet ejection settings during the printing process, when the behavior of the droplet directly affects the accuracy of the printing process itself. A numerical model was also developed to investigate the effect of various settings on droplet stability, including printhead size and nozzle orifice, motion parameters (pulse strength and droplet ejection amplitude) and fluid properties. The results reflect the behavior of the ink droplet over time. The behavior of the drop was tested at different waveform ejection parameters and a mass turnover was observed.

The numerical simulation and analysis of the ejection of an ink droplet through a nozzle as well its motion through air until its contact with a surface and taking up of a stable form is performed. The fluid flow is modeled by the incompressible Navier–Stokes equations with added surface tension. The presented model can be solved using either a level set or a phase field method to track the fluid interface. Here, the level set method is used to determinate the interface between ink and air. The presented work concentrates on the demonstration how to check the suitability of ink for inkjet printhead nozzles, for instance, for the use in printers. The results such as velocity, change of size, and volume dependence on time of an ink droplet are presented. Recommendations for the use of specific inks are also given.

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

No abstract