Much discussion surrounds the flight of a football especially that perceived as irregular and is typically done so with little understanding of the aerodynamic effects or substantive evidence of the path taken. This work establishes that for a range of FIFA approved balls there is a significant variation in aerodynamic performance.This paper describes the methods used for mounting stationary and spinning footballs in a wind tunnel enabling accurate force data to be obtained, and the analysis techniques used. The approach has been to investigate a number of scenarios: Non-spinning Reynolds Sweep, Unsteady Loads, Orientation Sensitivity (Yaw Sweep) and Spinning Reynolds Sweep. The techniques are applied to a number of footballs with differing constructions and the results reported. To put the aerodynamic data into context the results are applied in a flight model to predict the potential differences in the behaviour of each ball in the air.The paper concludes that although the drag characteristics are different for the different balls tested the simulation suggests that this has only a limited effect on the flight of the ball. It is also shown that the unsteadiness of the aerodynamic loads is unlikely to be responsible for unpredictable behaviour. However, it is also shown that there are significant differences in the lateral aerodynamic forces for a range of FIFA approved match balls, and that these aerodynamic differences have a significant effect on the flight path for both spinning and for slowly rotating balls.
Carbon fibre-reinforced polymer (CFRP) composites are widely used in aerospace, automotive and construction structures thanks to their high specific strength and stiffness. They can also be used in various products in sports industry. Such products can be exposed to different in-service conditions such as large bending deformation and multiple impacts. In contrast to more traditional homogeneous structural materials like metals and alloys, composites demonstrate multiple modes of damage and fracture due to their heterogeneity and microstructure. Damage
This paper demonstrates the value of using a flight model in the analysis of the flight of a football, and explores the complexity of the model required to produce useful results. Two specific aspects of the simulation are addressed: the need to include a model of spin decay and the requirement to include a full aerodynamic drag profile as a function of Reynolds number rather than a single indicative value. Both are aspects of the ball performance that are experimentally intensive to obtain. The simulated flights show that the inclusion of spin degradation is important if flight validation is the objective, but that it may be unnecessary in a comparative study. The simple analytical model of spin degradation is shown to over-estimate the reduction in lateral deviation when compared to experimentally acquired data. Therefore, the experimental method is preferred. The analysis of the shape of the drag profile (drag coefficient against Reynolds number) is explored, and it is shown from the simulated flights that post-critical coefficients of drag have the greatest effect on trajectories, and an average drag value is sufficient for most modelled scenarios.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.