Extracellular vesicles (EVs) are the substances that are released by most types of cells and have an important role in cell to cell communication. Among the most highly researched EVs are exosome. Recent studies show that exosomes derived from cells have different roles and targets. Many studies show that exosome can efficiently deliver many different kinds of cargo to the target cell. Therefore, they are often used to deliver therapeutic cargo for treatment. The exosomes that have been used include both natural ones and those that have been modified with other substances to increase the delivery ability. This article provides a review of both exosomes derived from various cells and modified exosome and their ability in delivering the many kinds of cargo to the target cell.

Cardiovascular disease is the leading cause of mortality worldwide. Atherosclerosis, one of the most common forms of the disease, is characterized by a gradual formation of atherosclerotic plaque, hardening, and narrowing of the arteries. Nanomaterials can serve as powerful delivery platforms for atherosclerosis treatment. However, their therapeutic efficacy is substantially limited in vivo due to nonspecific clearance by the mononuclear phagocytic system. In order to address this limitation, rapamycin (RAP)‐loaded poly(lactic‐ co ‐glycolic acid) (PLGA) nanoparticles are cloaked with the cell membrane of red blood cells (RBCs), creating superior nanocomplexes with a highly complex functionalized bio‐interface. The resulting biomimetic nanocomplexes exhibit a well‐defined “core–shell” structure with favorable hydrodynamic size and negative surface charge. More importantly, the biomimetic nature of the RBC interface results in less macrophage‐mediated phagocytosis in the blood and enhanced accumulation of nanoparticles in the established atherosclerotic plaques, thereby achieving targeted drug release. The biomimetic nanocomplexes significantly attenuate the progression of atherosclerosis. Additionally, the biomimetic nanotherapy approach also displays favorable safety properties. Overall, this study demonstrates the therapeutic advantages of biomimetic nanotherapy for atherosclerosis treatment, which holds considerable promise as a new generation of drug delivery system for safe and efficient management of atherosclerosis.

Drug-eluting stents (DES) have become more widely used by cardiologists than bare metal stents (BMS) because of their better ability to control restenosis. However, recognized negative events, particularly including delayed or incomplete endothelialization and late stent thrombosis, have caused concerns over the long-term safety of DES. Although stent-based drug delivery can facilitate a drug's release directly to the restenosis site, a burst of drug release can seriously affect the pharmacological action and is a major factor accounting for adverse effects. Therefore, the drug release rate has become an important criterion in evaluating DES. The factors affecting the drug release rate include the drug carrier, drug, coating methods, drug storage, elution direction, coating thickness, pore size in the coating, release conditions (release medium, pH value, temperature), and hemodynamics after the stent implantation. A better understanding of how these factors influence drug release is particularly important for the reasonable use of efficient control strategies for drug release. This review summarizes the factors influencing the drug release from DES and presents strategies for enhancing the control of the drug's release, including the stent design, the application of absorbable stents, the development of new polymers, and the application of nanocarriers and improvements in the coating technology. Therefore, this paper provides a reference for the preparation of novel controlled slow-release DES.

Using a stainless steel mesh as a template collector, electrospun nanofiber meshes with well-tailored architectures and patterns were successfully prepared from biodegradable poly (epsilon-caprolactone) (PCL). It was found that the resulting PCL nanofiber (NF) meshes had similar topological structures to that of the template stainless steel mesh. Such PCL nanofiber meshes (NF meshes) had improved the tensile strength with Young's modulus of 62.7 +/- 5.3 MPa, which is >40% higher than the modulus of 44 +/- 5.7 MPa as measured with the corresponding randomly oriented PCL nanofiber mats (RNF mat). On the other hand, the ultimate strain (87.30%) of the PCL NF meshes was distinctly lower than that of the PCL RNF mats (146.46%). To the best of our knowledge, this is the first time that the mechanical properties of nanofiber meshes with tailored architectures and patterns were studied and reported. When cultured with a mouse osteoblastic cell line (MC3T3-E1), the electrospun PCL NF meshes gave a much higher proliferation rate as compared with the randomly oriented PCL RNF mats. More importantly, it was found that the cells grew and elongated along the fiber orientation directions, and the resulted cellular organization and distribution mimicked the topological structures of the PCL NF meshes. These results indicated that the electrospun nanofiber scaffolds with tailored architectures and patterns hold potential for engineering functional tissues or organs, where an ordered cellular organization is essential.

No abstract

We studied the effects of gene transfection of endothelial cells with vascular endothelial growth factor (VEGF) on re-endothelialization and inhibition of in-stent restenosis. Transfected endothelial cells (ECs) exposed to different VEGF levels were seeded on a stent surface for evaluation in vitro. VEGF121(++) ECs and VEGF121(--) ECs were established using lentiviral-mediated HUVECs transfection. VEGF RNA transcription level and VEGF protein expression were detected by qPCR, Western blot, and ELISA. Methyl thiazolyl tetrazolium (MTT) assay, wound healing assay, and in vitro HUVEC tube formation assay showed that VEGF overexpression promoted cell proliferation, migration, and endothelial capillary-like tube formation. Downregulation of VEGF expression inhibited these activities. Using a rotational culturing system, cells tightly adhered on the stent surface. Stents seeded with transfected ECs at different VEGF levels were implanted in abdominal aortas of New Zealand white rabbits to study re-endothelialization and inhibition of in-stent restenosis. Stents with cells exposed to excess VEGF expression were almost completely covered with cells after stent implantation for 1 week (w). In the VEGF interference group this process was delayed over 4 w due to RNAi-mediated silencing of VEGF. Cryosectioning after 12 w showed that stents seeded with HUVECs exposed to excess VEGF expression significantly reduced the neointima area and stenosis when compared with bare metal stents and stents from the VEGF interference group. Transgenic HUVECs were not found in tissues of experimental animals. Furthermore, cells from these tissues were similar to those from normal tissue. In conclusion, VEGF-mediated endothelialization was found. Furthermore, ECs exposed to VEGF overexpression reduced neointimal hyperplasia, promoted endothelialization, and reduced in-stent restenosis.

Compared with early bare-metal stents, drug-eluting stents (DESs) are more effective in treating coronary artery diseases, especially in inhibiting restenosis. However, in-stent restenosis still clinically occurs at a non-negligible rate. More importantly, delayed endothelialization, inflammation, and hypersensitivity trigger subacute or late adverse events, particularly stent thrombosis, and thereby raise more concerns over the long-term safety of DESs. These problems are mostly associated with the permanent polymeric materials, non-optimal therapeutic drugs, and/or metallic stent platforms used in current DES design. It is critically important to further improve and optimize DES design and apply newer strategies for developing next generation DES. These new generation DESs should maintain their clinical efficacy and meanwhile eliminate the long-term safety concerns. In this review article, the current information on the optimization of DES design was critically reviewed based on DES's basic components, namely, stent platform, restenotic drug, and polymer coating. The available strategies for designing next-generation DESs were also summarized, ranging from degradable polymer DESs, to polymer-free DESs, to fully biodegradable DESs.

No abstract