Above‐equilibrium “hot”‐carrier generation in metals is a promising route to convert photons into electrical charge for efficient near‐infrared optoelectronics. However, metals that offer both hot‐carrier generation in the near‐infrared and sufficient carrier lifetimes remain elusive. Alloys can offer emergent properties and new design strategies compared to pure metals. Here, it is shown that a noble‐transition alloy, AuxPd1−x, outperforms its constituent metals concerning generation and lifetime of hot carriers when excited in the near‐infrared. At optical fiber wavelengths (e.g., 1550 nm), Au50Pd50 provides a 20‐fold increase in the number of ≈0.8 eV hot holes, compared to Au, and a threefold increase in the carrier lifetime, compared to Pd. The discovery that noble‐transition alloys can excel at hot‐carrier generation reveals a new material platform for near‐infrared optoelectronic devices.
Devices driven by above-equilibrium “hot” electrons are appealing for photocatalytic technologies, such as in situ H2O2 synthesis, but currently suffer from low (<1%) overall quantum efficiencies. Gold nanostructures excited by visible light generate hot electrons that can inject into a neighboring semiconductor to drive electrochemical reactions. Here, we designed and studied a metal–insulator–metal (MIM) structure of Au nanoparticles on a ZnO/TiO2/Al film stack, deposited through room-temperature, lithography-free methods. Light absorption, electron injection efficiency, and photocatalytic yield in this device are superior in comparison to the same stack without Al. Our device absorbs >60% of light at the Au localized surface plasmon resonance (LSPR) peak near 530 nma 5-fold enhancement in Au absorption due to critical coupling to an Al film. Furthermore, we show through ultrafast pump–probe spectroscopy that the Al-coupled samples exhibit a nearly 5-fold improvement in hot-electron injection efficiency as compared to a non-Al device, with the hot-electron lifetimes extending to >2 ps in devices photoexcited with fluence of 0.1 mJ cm−2. The use of an Al film also enhances the photocatalytic yield of H2O2 more than 3-fold in a visible-light-driven reactor. Altogether, we show that the critical coupling of Al films to Au nanoparticles is a low-cost, lithography-free method for improving visible-light capture, extending hot-carrier lifetimes, and ultimately increasing the rate of in situ H2O2 generation.
Resonant plasmonic–molecular chiral interactions are a promising route to enhanced biosensing. However, biomolecular optical activity primarily exists in the far-ultraviolet regime, posing significant challenges for spectral overlap with current nano-optical platforms. We demonstrate experimentally and computationally the enhanced chiral sensing of a resonant plasmonic–biomolecular system operating in the far-UV. We develop a full-wave model of biomolecular films on Al gammadion arrays using experimentally derived chirality parameters. Our calculations show that detectable enhancements in the chiroptical signals from small amounts of biomolecules are possible only when tight spectral overlap exists between the plasmonic and biomolecular chiral responses. We support this conclusion experimentally by using Al gammadion arrays to enantiomerically discriminate ultrathin (<10 nm thick) films of tyrosine. Notably, the chiroptical signals of the bare films were within instrumental noise. Our results demonstrate the importance of using far-UV active metasurfaces for enhancing natural optical activity.
Noble-transition metal alloys offer emergent optical and electronic properties for near-infrared (NIR) optoelectronic devices. We investigate the optical and electronic properties of CuxPd1-x alloy thin films and their ultrafast electron dynamics under NIR excitation. Ultraviolet photoelectron spectroscopy measurements supported by density functional theory calculations show strong d-band hybridization between the Cu 3 d and Pd 4 d bands. These hybridization effects result in emergent optical properties, most apparent in the dilute Pd case. Time-resolved terahertz spectroscopy (TRTS) with NIR (e.g., 1550 nm) excitation displays composition tunable electron dynamics. We posit that the negative peak in the normalized increment of transmissivity (ΔT/T) below 2 ps from dilute Pd alloys is due to non-thermalized hot-carrier generation. On the other hand, Pd-rich alloys exhibit an increase in ΔT/T due to thermalization effects upon ultrafast NIR photoexcitation. CuxPd1-x alloys in the dilute Pd regime may be a promising material for future ultrafast NIR optoelectronic devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.