MEMS fabricated on polymer substrates can allow for a range of new applications that require bending or lightweight, unbreakable substrates. The surface micromachining of hydrogenated amorphous silicon resonators on 10 µm-thick flexible polyimide substrates is presented. Clamped-clamped (bridges) and clamped-free (cantilevers) resonators are fabricated and characterized, exhibiting quality factors as high as 2.0 × 103 and natural resonance frequencies in the 104–106 Hz range. The deflection of an 80 µm long bridge was measured to be over 100 pm, using laser Doppler vibrometry. The electrical addressing of the devices was demonstrated to be reliable when bent to radii of curvature larger than 10 mm. The resonators on ultra-thin polymer are characterized using different actuation voltages and pressures, showing comparable performance to resonators on rigid (glass) substrates. However, the flexible substrate allows the relaxation of the residual stress of the structural film in clamped-clamped structures, lowering the resonance frequency. Resonators on PI were found to be suitable for mass-sensing applications, achieving a minimum frequency shift detectable Δfmin = 30 Hz which results in a calculated mass sensitivity of 25 pg in vacuum. Ultimately, the reliable performance of the resonators developed in this work make them good candidates for applications that require mass-sensing on ultra-thin, flexible substrates.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.