, pela preciosa orientação e enorme dedicação.Por diversas vezes cheguei a pensar que o dia para ele tinha bem mais do que vinte e quatro horas.Aos meus pais por acreditar em meu sonho, me estimulando para que eu acreditasse também. Vocês são mais que exemplos, verdadeiras inspirações. RESUMOObjetivo principal desta dissertação foi verificar os efeitos da temperatura de laminação na formação de martensita induzida por deformação e na sua posterior reversão da martensita para austenita no aço inoxidável austenítico AISI 304L. O estudo foi predominantemente microestrutural e para análise e caracterização foram utilizadas as técnicas de microscopia óptica, microscopia eletrônica de varredura, difração de raios X, medidas de dureza Vickers e medidas de fases ferromagnéticas por ferritoscopia.As amostras foram inicialmente solubilizadas a 1100 ºC por uma hora, visando a dissolução de uma pequena quantidade residual de ferrita encontrada nas amostras na condição como recebida, depois laminadas em diferentes temperaturas, determinando-se curvas de endurecimento por deformação e de formação de martensita induzida por deformação em função do grau de deformação. Em seguida, foram realizados pré-recozimentos a 600 ºC, favorecendo apenas a reversão da martensita para austenita, de maneira que não ocorresse a recristalização. A quantidade e a temperatura de deformação apresentaram forte influência na quantidade de martensita formada, no endurecimento por deformação e na cinética de amolecimento durante o recozimento. Os pré-tratamentos realizados a 600 ºC causaram acentuada reversão da martensita, algum amolecimento e pequeno efeito no tamanho de grão recristalizado durante o posterior recozimento a 600 ºC.Palavras-chave: Aço inoxidável austenítico 304L, endurecimento por deformação, martensita induzida por deformação, reversão da martensítica, recristalização, refino de grão. ABSTRACT ABSTRACTThe main objective of the present dissertation was to verify the effects of the rolling temperature on the formation of strain induced martensite and in its subsequent martensite reversion to austenite in a AISI 304L stainless steel. The study was predominantly microstructural and, for the analysis and characterization, several techniques have been used, namely optical microscopy, scanning electron microscopy, X-ray diffraction, Vickers hardness measurements and magnetic phase measurements, using the ferritoscope.The samples were initially solution annealed at 1100 ºC for one hour, aiming at the dissolution of a small quantity of the residual -ferrite found in the samples in the "asreceived" condition; then rolling was performed at different temperatures, evaluating strain hardening and the strain induced martensite as a function of strain. Following, preannealing treatments at 600 ºC have been performed, favoring only the martensite to austenite reversion, in a way that no recrystallization would occur. Strain and temperature had a strong influence on the amount of formed martensite, on the strain hardening and on the softening kinet...
ResumoO presente trabalho teve por objetivo verificar a influência do Nióbio na trabalhabilidade a quente de um aço inoxidável duplex do tipo UNS S32304 em condições similares às do processamento industrial, utilizando ensaios de torção a quente. Foram fundidas, em forno de indução a vácuo, 4 corridas experimentais: uma com a composição química padrão e as outras objetivando-se teores de Nióbio de 0,2%, 0,4% e 0,8%. Ensaios de torção a quente foram realizados em resfriamento contínuo a partir de 1.200ºC, e ensaios isotérmicos no intervalo de temperaturas de 1.200 a 900ºC. O aumento da fração volumétrica de ferrita em função do aumento da concentração de Nióbio melhorou a trabalhabilidade a quente destas ligas. Palavras-chave: Aços inoxidáveis duplex; Trabalhabilidade a quente; Nióbio; Ensaio de torção.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.