ResumoO objetivo deste trabalho foi investigar alterações microestruturais em um aço microligado ao Nióbio simulando sua laminação através de ensaios de torção a quente. Ensaios de torção com deformações em resfriamento contínuo foram realizados para determinar as temperaturas críticas do material, que também foram calculadas empregando equações disponíveis na literatura. Um esquema de laminação a quente semelhante ao utilizado em laminadores reversíveis foi simulado variando-se as temperaturas dos passes de acabamento. Análise metalográfica foi conduzida por microscopia óptica com objetivo de obter o tamanho de grão ferrítico dos corpos de prova após simulações. Medições de dureza também foram realizadas. Foi constatado que o refino do grão ferrítico e consequente aumento da dureza são proporcionais à queda de temperatura do último passe da simulação. Palavras-chave: Aço Microligado; Ensaios de Torção; Simulação de Laminação a Quente; Nióbio.
ResumoO presente trabalho teve por objetivo verificar a influência do Nióbio na trabalhabilidade a quente de um aço inoxidável duplex do tipo UNS S32304 em condições similares às do processamento industrial, utilizando ensaios de torção a quente. Foram fundidas, em forno de indução a vácuo, 4 corridas experimentais: uma com a composição química padrão e as outras objetivando-se teores de Nióbio de 0,2%, 0,4% e 0,8%. Ensaios de torção a quente foram realizados em resfriamento contínuo a partir de 1.200ºC, e ensaios isotérmicos no intervalo de temperaturas de 1.200 a 900ºC. O aumento da fração volumétrica de ferrita em função do aumento da concentração de Nióbio melhorou a trabalhabilidade a quente destas ligas. Palavras-chave: Aços inoxidáveis duplex; Trabalhabilidade a quente; Nióbio; Ensaio de torção.
ResumoO objetivo deste trabalho foi investigar os efeitos da temperatura de laminação na microestrutura de um aço microligado ao Nióbio através de simulação por ensaios de torção a quente. Ensaios foram realizados com deformações em resfriamento contínuo para determinar as temperaturas de não recristalização da austenita (Tnr) e de início da transformação austenita-ferrita (Ar3). Foram realizados ensaios de torção simulando diferentes esquemas de laminação a quente em laminador Steckel, variando-se as temperaturas dos passes de acabamento. Foi observado, nas curvas tensão em função da deformação dos ensaios de torção, gradual encruamento da austenita quando a temperatura da última deformação foi inferior à 870°C. Foi também observado que o tamanho de grão ferrítico cresce com temperatura de laminação de acabamento. Palavras-chave: Aço microligado; Laminador Steckel; Ensaios de torção; Simulação de laminação; Nb.
STECKEL MILL HOT ROLLING SIMULATION BY TORSION TEST OF A NIOBIUM MICROALLOYED STEEL AbstractThe objective was to investigate the effect of hot rolling temperature on the microstructure of Niobium microalloyed steel by torsion test simulation. Torsion tests were carried out using deformations in continuous cooling to obtain austenite non recrystallization (Tnr) and austenite -ferrite transformation (Ar3) temperatures. Torsion tests were also conducted to simulate Steckel mill hot rolling schemes by varying the temperature of the finishing rolling passes. The torsion stress-strain curves showed gradual austenite strain hardening for last deformation temperature below 870 °C. It was also observed that the ferritic grain size increases with finishing rolling temperature.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.